VARGA T-Stop for VA 11, VA 21-7/-15, VA 31-15

The T-stop, made of nickel-plated brass, is a spare part for the Varga VA 11, VA 21-7, VA 21-15 and VA 31-15 table saws and serves as a precise end stop for the saw blade within the guide rail. It ensures exact blade positioning, supporting clean and repeatable cuts. The T-stop is glued into the guide rail and must then be re-cut. For correct installation, it is important to follow the corresponding instructions.

• Suitable for: VA 11, VA 21-7, VA 21-15, VA 31-15
• Dimensions: 61 x 10 x 4 mm (2.40 x 0.39 x 0.16 in)
• Weight: 15 g (0.03 lbs)

Manufacturer:
Varga System GmbH, Hainkämpe 5, 28832 Achim, Germany
Email: info@varga-system.com

Warning Notes:
When installing or removing the blade cover, there is a risk of injury from sharp edges and rotating parts. Work on the device may only be carried out when it is disconnected from the power supply. Installation may only be carried out in suitable Varga table saws (VA 1, VA 10). Incorrect installation or use can lead to malfunctions, material damage, or personal injury. The blade cover must not be operated if components are damaged or incompletely assembled.

Safety Instructions:
Installation and maintenance may only be carried out by trained specialists in accordance with the manufacturer's instructions. Before commissioning, check that all fastenings are tightened securely and that protective covers are fitted correctly. The device may only be operated if it is in perfect working order.

Intended Use:
The T-stop serves as a precise end stop for the saw blade in the guide rail of the Varga table saws VA 11, VA 21-7, VA 21-15 and VA 31-15 and ensures exact positioning for clean, repeatable cuts.