VARGA Depth Regulator for VA 2

The depth regulator, made of anodized aluminum, is a spare part for the Varga edge milling unit VA 2. The material thickness can be precisely adjusted using two set screws on the guide rail. It ensures even chamfering and delivers clean, accurate results.

• Suitable for: VA 2
• Dimensions: 300 x 18 x 14 mm (11.81 x 0.71 x 0.55 in)
• Weight: 121 g (0.27 lbs)

Manufacturer:
Varga System GmbH, Hainkämpe 5, 28832 Achim, Germany
Email: info@varga-system.com

Warning Notes:
Before use, ensure that the depth regulator is undamaged and correctly mounted on the Varga VA 2 edge milling machine. Assembly and adjustment may only be carried out when the machine is switched off and disconnected from the power supply. The adjusting screws must be tightened securely to ensure safe guidance and a stable hold during the milling process.

Safety Instructions:
Before each use, check that the lifting cable and the screws supplied are securely fastened. To ensure operational safety, only original spare parts may be used. After installation, carefully check the function of the lifting cable before starting up the machine.

Intended Use:
The depth regulator is used to guide the workpiece safely and precisely on the Varga VA 2 edge milling machine in order to ensure uniform removal of the facet and clean edges.