Name Badges & Awards
Engraving materials for individual, decorative and personalised markings. Thin engraving plastics, coated aluminium materials and premium brass surfaces are available for name badges, trophy plates, commemorative plaques, medal engraving and club signs using a range of engraving processes.
Personalised Engraving with a Premium Appearance
For name badges and awards, good readability is just as important as a high quality surface, precise details and a material thickness suited to the application. Names, logos, years, placements and dedications can be engraved individually and displayed permanently.
Depending on the desired appearance, flexible engraving plastics, laser markable aluminium, coated metal surfaces or classic engraving brass can be used.
Our Material Recommendations for Name Badges & Awards
The right material depends on the engraving process, material thickness, surface finish and desired appearance. For personalised signs, trophies and awards, we particularly recommend the following INNOGRAV materials.
LaserFlex
LaserFlex is a thin, flexible engraving material for name badges, trophy base plates and decorative lettering. Its matte, low reflection surface supports excellent readability.
- Laser and rotary engraving
- Matte, low reflection surface
- Flexible material
- 0.8 mm material thickness
- Ideal for name badges and trophy plates
LaserUltra
LaserUltra is an especially thin engraving material for small signs and fine lettering. With a material thickness of only 0.5 mm, it is particularly suitable for trophy base plates and compact name badges.
- Laser engraving and laser cutting
- Thin, flexible material
- Microthin surface layer
- 0.5 mm material thickness
- Ideal for trophy base plates
LaserFoil
LaserFoil is a very thin, flexible and self adhesive solution for personalised lettering. It is particularly suitable for small name fields, plaques, medal engraving and slightly curved surfaces.
- Laser and rotary engraving
- Self adhesive backing
- High adhesive strength
- Suitable for curved surfaces
- 0.2 mm material thickness
AlumaMark
AlumaMark is laser markable aluminium for premium name badges, plaques, trophy plates and decorative awards. Laser marking produces black markings on metallic surfaces.
- Specially designed for CO₂ laser marking
- Black markings on metallic surfaces
- Suitable for photos and detailed graphics
- 0.13 / 0.51 mm material thickness
- Ideal for name badges and trophy plates
AluSign
AluSign is a surface treated aluminium for precise, deep black laser marking. Its matte metal surface is suitable for premium name badges, plaques and awards with fine details.
- Surface treated aluminium
- Deep black laser marking
- High level of detail
- 0.5 / 1.0 mm material thickness
- For interior and exterior use
AluCast
AluCast is an easy to process, surface treated aluminium developed for laser engraving. Depending on the version, laser processing creates black or white markings.
- Developed for laser engraving
- Matte or glossy finish
- Black or white marking depending on version
- 0.51 mm material thickness
- For fine decorative lettering
Laserable Brass
Laserable Brass is lacquered brass with a glossy black surface. During engraving, the polished gold brass surface is exposed, creating an especially elegant and high contrast appearance.
- Specially developed for laser engraving
- Glossy black surface
- Polished gold engraving contrast
- 0.6 mm material thickness
- Ideal for awards and decorative signs
LaserMetall
LaserMetall is coated aluminium for precise, high contrast laser engraving. Depending on the version, the engraving appears polished gold or silver, making it suitable for premium nameplates and award plates.
- Coated aluminium
- Developed for laser engraving
- Gold or silver engraving contrast
- 0.51 mm material thickness
- For fine details and decorative lettering
Engraving Brass (satined)
Engraving Brass (satined) provides a premium, lightly brushed metal surface for classic trophy plates, commemorative plaques, club signs and decorative engraving.
- Brass, nickel or copper variants
- Satined, lightly brushed finish
- For rotary and diamond engraving
- Nylon coating against oxidation
- For premium awards and commemorative plaques
Engraving Brass (polished)
Engraving Brass (polished) is suitable for especially representative nameplates, commemorative plaques, trophy plates and awards. Its polished metal surface creates a classic and premium appearance.
- Polished brass surface
- For rotary and diamond engraving
- Nylon coating against oxidation
- Premium representative appearance
- Ideal for trophies and commemorative plaques
Which Material Is Suitable for Which Application?
| Application | Recommendation | Key Benefit |
|---|---|---|
| Lightweight name badges | LaserFlex / LaserUltra | Thin, lightweight and suitable for small formats |
| Self adhesive labels | LaserFoil | 0.2 mm thin, flexible and self adhesive |
| Trophy plates | AlumaMark / Laserable Brass / LaserMetall | Premium metal appearance and fine personalisation |
| Fine black laser marking | AluSign | Deep black, precise marking on aluminium |
| Decorative aluminium plaques | AluCast / AlumaMark | Metallic surfaces with high contrast laser marking |
| Classic commemorative plaques | Engraving Brass (satined) / Engraving Brass (polished) | Representative brass surfaces for rotary and diamond engraving |
| Club & memorial signs | Laserable Brass / Engraving Brass (satined) / AluSign | Classic or modern metal appearance for permanent dedications |
What Should Be Considered for Name Badges & Awards?
Fine Details
Names, logos, placements and dedications are often displayed on small surfaces. Material and engraving process should therefore allow a high level of detail.
Material Thickness
Thin materials are particularly practical for trophy bases and name badges. LaserFoil, LaserUltra and LaserFlex enable compact and lightweight lettering.
Surface & Appearance
Matte surfaces create a subtle, modern appearance, while polished brass and metal finishes provide a classic and representative look.
Laser or Rotary Engraving
AlumaMark, AluSign, AluCast and LaserMetall are suitable for laser marking. Engraving Brass (satined) and Engraving Brass (polished) are particularly suitable for mechanical rotary and diamond engraving.
Personalisation
Series with different names, placements or years can be individualised efficiently using digital engraving processes.
Mounting
Small plaques can be bonded, screwed in place or inserted into existing recesses. LaserFoil already provides a self adhesive backing.
Name Badges and Sign Blanks
In addition to engraving materials, INNOGRAV also offers ready made name badges and sign blanks for companies, trade fairs, events, hotels, retail and customer service. Depending on the version, laser engraving, rotary engraving, sublimation or self printing can be used.
Custom Cuts for Name Badges and Awards
Many INNOGRAV materials can be ordered as full sheets, strips or custom cut pieces. This allows trophy plates, name badges, plaques and award plates to be produced efficiently in a wide range of formats.
Depending on the material, additional processing such as drilled holes, rounded corners, bevelled edges or self adhesive backing may also be available.
Find the Right Material for Name Badges & Awards
Do you need material for name badges, trophy plates, commemorative plaques, medal engraving or club signs? We can help you select the right material, surface finish, thickness and engraving process.
Frequently Asked Questions About Name Badges & Awards
Which material is suitable for trophy plates?
LaserUltra, LaserFlex, AlumaMark, Laserable Brass and LaserMetall are particularly suitable for trophy plates. Depending on the desired appearance, lightweight plastic solutions or premium metal surfaces are available.
Which material is suitable for premium name badges?
AlumaMark, AluSign, AluCast and LaserMetall are suitable for premium name badges. LaserFlex and LaserUltra are also suitable for lightweight, flexible badges.
Which material is suitable for commemorative plaques?
Engraving Brass (satined) and Engraving Brass (polished) provide a particularly representative appearance for classic commemorative plaques. Modern versions can also be produced using AluSign, AlumaMark or Laserable Brass.
Which materials are suitable for fine laser engraving?
AlumaMark, AluSign, AluCast and LaserMetall enable precise laser marking on metal. AlumaMark is also particularly suitable for photos, graphics and halftones.
Which materials are suitable for mechanical engraving?
Engraving Brass (satined) and Engraving Brass (polished) are intended for mechanical rotary and diamond engraving. LaserFlex and LaserUltra can also be mechanically processed depending on the application.
Are self adhesive labels possible?
Yes. LaserFoil has a self adhesive backing and is especially suitable for small plaques, medal engraving and slightly curved surfaces.
Can the materials be supplied as custom cuts?
Many INNOGRAV engraving materials are available as full sheets, strips or custom cut pieces. Depending on the material, additional processing such as drilled holes, bevelled edges and rounded corners can also be provided.