Zaponlack clear 400ml
- Varnish with a nitrocellulose base
- for protecting copper or brass against oxidation
- Clear
- 400 ml aerosol can
Fast drying, clear varnish with a nitrocellulose base.
Volume: 400 ml
Manufacturer:
Prosol Spraytechnik GmbH, Lindigstraße 8, 63801 KLEINOSTHEIM, Germany
E-mail: info@prosol-spraytechnik.de
Signal word:
Danger
Warning Notes:
Extremely flammable aerosol. Container is pressurized: can burst when heated. Causes severe eye irritation. May cause drowsiness and lightheadedness.
Safety Instructions:
If medical advice is required, have packaging or labelling ready. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray against open flame or other ignition source. Do not puncture or burn, even after use. Avoid inhaling dust/smoke/gas/mist/steam/aerosol. Use only outdoors or in well-ventilated rooms. Protect from sunlight. Do not expose to temperatures above 50°C/122°F.
Intended Use:
The product is intended for painting metals to protect against oxidation.
Customers also bought
Aluminium Oxide 96ml
- Blackening solution for aluminium alloys
- Bottle can contents 96 ml
CerMark LMM6000 Spray Can, 340g
- LMM6000 Spray Can
- Black Laser Marking
- For Many Metals
- Contents 340 g
3M Industrial Cleaner Spray 500 ml
- 3M Industrial Cleaner
- High cleaning performance
- Citrus Base Cleaner
- Volume 500 ml
Magnet Badge MAG 01 #987-001
- For self-manufacture of name badges
- Very high magnetic power
- Base is made of plastic
- 45 x 13 mm
- Zinc-plated steel plate w/ foam pad
Tissue Tape 244mm x 100m
- Low tack, paper mask
- Made for laser engraving, crystal etchings, and letter transferring
- Protects foil from edge burn while laser engraving
- Size 244 mm x 100 m
Last seen products
Stainless Steel (V2A)
- Stainless steel 1.4301 (V2A)
- Grinded on one side
- Cold rolled IIIc/2b
Standard Cutter 6,35x165mm
2,00mm
- Solid Carbide
- Standard Cutter
- 6,35 x 165 mm
- 9 available tip sizes