LaserSatin

Laser engraving and cutting
Rotary engravable
Slightly brusged, non-glare finish
Microthin surface layer
High-value metal optic

Its surface has a slightly brushed structure, similar to the engraving material PLY 1. The UV-resistant, micro-thin coating allows very fine engravings without shadowing and is therefore also ideally suited for less powerful laser engraving machines.

Product Information:
LaserSatin is a two-layer engraving material for high contrast lettering, signs and technical identification. Key characteristics include a microthin cap layer for fine text and detailed logos. The surface finish is particularly effective in the colours brass and platinum (LZS-999-016 / LZ-998-016). The high-gloss, polished surface gives these colours a precious metallic character.

Application and Processing:
Laser power, speed, frequency and focus should be adjusted so that the surface layer is cleanly removed without unnecessarily engraving too deeply into the substrate. For small lettering and detailed designs, consistent focus and a flat material surface are particularly important. Before processing larger quantities, we recommend testing the parameters using the actual colour combination and material thickness.

More about Knowledge & Processing ›

Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com

Warning Notes:
Caution! Flammable material. Health-hazardous fumes when heated! Risk of breakage with improper handling.

Safety Instructions:
Keep away from heat sources. Ensure adequate room ventilation during storage and use. Use a local exhaust system in areas with dust and smoke development.

Intended Use:
The product is intended for the production of signs.

Prices are only available upon verified registration on this website