LaserAcryl 3
- Laser engraving and cutting
- Rotary engravable
- UV stable
- Microthin surface layer for detailed engraving
LaserAcryl 3 was specially developed for precise laser engraving and laser cutting. With a material thickness of 3.0 mm, it is particularly suitable for stable signs, technical markings and applications requiring high dimensional stability and durability.
Product Information:
LaserAcryl 3 is a two-layer engraving material with a UV-resistant, ultra-thin surface layer. Its construction enables fine, high-contrast engravings with clean contours as well as detailed lettering and logos. The material is suitable for raster engraving, vector engraving and precise laser cutting.
Application and Processing:
Laser power, speed, frequency and focus should be adjusted so that the surface layer is cleanly removed without unnecessarily engraving too deeply into the substrate. For small lettering and detailed designs, consistent focus and a flat material surface are particularly important. Before processing larger quantities, we recommend testing the parameters using the actual colour combination and material thickness.
Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com
Warning Notes:
Caution! Flammable material. Health-hazardous fumes when heated! Risk of breakage with improper handling.
Safety Instructions:
Keep away from heat sources. Ensure adequate room ventilation during storage and use. Use a local exhaust system in areas with dust and smoke development.
Intended Use:
The product is intended for the production of signs.
Colours
matte
Capabilities
- Laser
- Laser Vector Cuts
- Rotating Carbide
- Hot Stamps
- Screen Prints
- Drills
- Bonds
- Saws
- Shears
- Punch
Properties
| Finish: | Matte |
|---|---|
| Cutting Depth: | 0,1 mm |
| Thicknesses: | 3,0 mm |
| Standard Format: | 610 x 610 mm |
| Temp. max: | 80 °C |
| Engraving material: | Impact Acrylic |
- UV Stable
- Flexible
- Break-Proof
Usage
- Interior
- Exterior
Customers also bought
Plywood Poplar 600x300x3mm
- Low smoke emission
- Suitable for laser engraving and painting
- Surfaces are untreated
- Plywood made of Poplar
Adhesive Transfer Tape 19 mm x 50m
- High initial adhesion (tack)
- High shear strength
- Resistance to ageing, weathering and UV-radiation
- Resistance to the influence of chemicals and solvents
- 19 mm x 50 m
Bern, D.14mm, Stainless Steel (4pcs)
- 3-part wall spacer set
- Interior and exterior use
- Stainless steel (untreated)
- Panel thickness is variabel
- Wall space 10 mm
- Diameter 14 mm
- Head thickness 5 mm
Laser Rubber "No Smell", DIN A4, Grey
- Odorless Laser Processing
- Excellent Engraving Quality
- Clean Stamp Impressions
- High Ink Resistance
- Suitable for Many Stamp Types
Tissue Tape 244mm x 100m
- Low tack, paper mask
- Made for laser engraving, crystal etchings, and letter transferring
- Protects foil from edge burn while laser engraving
- Size 244 mm x 100 m
Marking Stick, white #507101
- Highlighter, fill-in paint
- For small engravings
- Paint stays flexible
- Mark temperature resistance 260°C
- Color white