VARGA Guide Rail Tongue w/ M4x6 Screw for VA 11, VA 21-7/-15, VA 31-15

Precisely manufactured Guide Rail Tongue for the blade cover casing – spare part for the Varga table saws VA 11, VA 21-7, VA 21-15 and VA 31-15. It ensures accurate guidance of the blade cover casing , enabling a stable and clean cutting process. The item includes two M4 x 10 screws, allowing for quick and secure installation. Perfect as a spare part for easy maintenance and long-term precise operation of the machine.

• Suitable for: VA 11, VA 21-7, VA 21-15, VA 31-15
• Dimensions: 38 x 34 x 1,8 mm (1.50 x 1.34 x 0.07 in)
• Weight: 17 g (0.04 lbs)

Manufacturer:
Varga System GmbH, Hainkämpe 5, 28832 Achim, Germany
Email: info@varga-system.com

Warning Notes:
The guide rail tongue may only be mounted, adjusted or replaced when the device is switched off and disconnected from the mains. During sawing, there is a risk of injury from the rotating saw blade and moving machine parts. Damaged, bent or worn guide tongues must not be used, as they impair the precise guidance of the workpiece and can cause an increased risk of accidents. Improper installation or the use of unauthorised spare parts can lead to malfunctions and compromise the operational safety of the machine.

Safety Instructions:
Before assembly, ensure that all parts are clean, undamaged and free of residue. The guide tongue must be correctly aligned and mounted with the supplied M4 x 6 screw, tightened firmly but not excessively. After each maintenance or cleaning, check that it is securely fastened. Only original spare parts or components approved by the manufacturer may be used to ensure compliance with safety requirements. Changes, modifications or unauthorised repairs are not permitted and will result in a loss of product safety. Assembly and maintenance may only be carried out by trained or instructed specialist personnel.

Intended Use:
The precisely manufactured guide rail tongue for the cutter housing is a spare part for the Varga table saws VA 11, VA 21-7, VA 21-15 and VA 31-15. It is used for the exact guidance of the cutter housing and thus ensures a stable, precise and clean sawing process.