Zaponlack clear 400ml
- Varnish with a nitrocellulose base
- for protecting copper or brass against oxidation
- Clear
- 400 ml aerosol can
Fast drying, clear varnish with a nitrocellulose base.
Volume: 400 ml
Manufacturer:
Prosol Spraytechnik GmbH, Lindigstraße 8, 63801 KLEINOSTHEIM, Germany
E-mail: info@prosol-spraytechnik.de
Warning Notes:
Extremely flammable aerosol. Container is pressurized: can burst when heated. Causes severe eye irritation. May cause drowsiness and lightheadedness.
Safety Instructions:
If medical advice is required, have packaging or labelling ready. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray against open flame or other ignition source. Do not puncture or burn, even after use. Avoid inhaling dust/smoke/gas/mist/steam/aerosol. Use only outdoors or in well-ventilated rooms. Protect from sunlight. Do not expose to temperatures above 50°C/122°F.
Intended Use:
The product is intended for painting metals to protect against oxidation.
Customers also bought
markSolid 114 Aerosol Spray, 300ml
- Creating black marks on a variety of metal
3M Industrial Cleaner Spray 500ml
- 3M Industrial Cleaner
- High cleaning performance
- Citrus Base Cleaner
- Volume 0,5 litre
CerMark LMM 6000 Aerosol Spray, 340g
- LMM 6000 Aerosol
- Laser marking inks
- Creating black marks on a variety of metals
- Spray Can contents 340 g
Aluminium Oxide 96ml
- Blackening solution for aluminium alloys
- Bottle can contents 96 ml
Tissue Tape 244mm x 100m
- Low tack, paper mask
- Made for laser engraving, crystal etchings, and letter transferring
- Protects foil from edge burn while laser engraving
- Size 244 mm x 100 m
Last seen products
LaserFoil
- Flexible, thin laser engraving material
- Microthin surface layer
- Designed for the laser engrave
- Self-adhesive
- Available in 0,2 mm thickness