Vinyl Cutting Blade SUMMAGRAPHICS 36°
- Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting general signage vinyl 0,5 - 3,0 mm thick
- Offset 0,45 mm
- 36°
- SUMMAGRAPHICS
For cutting general signage vinyl 0,5 - 3,0 mm thick with 0,45 mm offset setting, angle 36°.
Blade is packaged with protective cap.
Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com
Warning Notes:
Sharp cutting edges can cause injuries. Mechanical overload can lead to a risk of breakage. Improper use or maintenance can compromise safety.
Safety Instructions:
Clean and inspect blade regularly. Use only in suitable machines and materials. Store the product safely out of the reach of children.
Intended Use:
The product is designed for precise cutting of materials such as paper, vinyl and foils in plotter cutters.
Prices are only available upon verified registration on this website
Product number:
63AVBSUM001
Customers also bought
Product number:
6150755
Aluminium Oxide Plus 96ml
- For Blackening Engravings on Anodized Aluminium
- Deep, Permanent Black Markings
- Improved Formula
- Reduced Hazard Classification
Product number:
6258102
Diamant Gravers 4,36x150mm 120°
- Diamond Graver
- Non-rotating tool
- Diamond angle: 120°
- Surface marking only
- 4,36 x 150,0 mm
Product number:
63AVBSUM003
Vinyl Cutting Blade SUMMAGRAPHICS 60°
- Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting material 12 mil. and thicker with 0.45 mm
- Offset 0,45 mm
- 60°
- SUMMAGRAPHICS
Product number:
55385507
Ornamental Plate Type 385 #507
- For Signage of paintings, saddles and honorary plates
- Signs out of brass
- 65 x 10 mm
- brass brushed
Product number:
45387507
Pet Tag Collar, satin brass, 61x12 mm
- Pet Tag Collar
- Satin brass covered with protective varnish
- 61 x 12 mm
Product number:
45388507
Pet Tag Collar, satin brass, 71x15 mm
- Pet Tag Collar
- Satin brass covered with protective varnish
- 71 x 15 mm
Last seen products
Product number:
70-1-3003046
VARGA Motor Carbon Cap (Piece)
- Protection of Motor Brush
- Suitable for: All Varga Models
- Product Type: Spare Part
Product number:
70-11-300298
VARGA Switch without Integrated Line Filter
- On/Off Switch without Line Filter
- Suitable for: VA 11, VA 21-15, VA 31-15
- Product Type: Spare Part
Product number:
70-1-300298
VARGA Switch with Integrated Line Filter
- On/Off Switch with Line Filter
- Year of Manufacture Varga Model: From 2018
- Suitable for: VA 2, VA 10, VA 21-7
- Product Type: Spare Part
Product number:
70-11-300232
VARGA Speed Control Regulator, 230 V~
- Control of Motor Power
- Speed: 13,000 - 15,000 rpm
- Suitable for: VA 11, VA 21-15, VA 31-15
- Product Type: Spare Part
Product number:
70-1-3003337
VARGA Puller Tool for Motor Mount Replacement
- Puller Tool for Motor Mount Replacement
- Saw Blade Holder Removal
- Suitable for All VARGA Models
Product number:
70-1-9006
VARGOL Special Lubrificant 0.5, lt.
- Friction Reduction for Clean, Precise Cuts
- Volume: 0.5 litres (16.9 fl oz)
- Not classified as hazardous according to CLP Regulation
- Suitable for: All Varga Table Saws