VARGA Speed Control Regulator, 230 V~
- Control of Motor Power
- Speed: 13,000 - 15,000 rpm
- Suitable for: VA 11, VA 21-15, VA 31-15
- Product Type: Spare Part
Compact and powerful phase angle control unit is a spare part for the Varga table saws VA 11, VA 21-15 and VA 31-15. Designed for 230 V mains voltage, the control unit enables optimum adjustment of the motor power to the respective application — for greater efficiency, safety and durability of the machine. The integrated mains filter effectively reduces electromagnetic interference and ensures trouble-free operation.
Technical Specifications:- Suitable for: VA 11, VA 21-15, VA 31-15
- Supply Voltage: 230 V~, 50 Hz
- Maximum Output Power: 800 W
- Adjustment Range: 13,000 – 15,000 rpm
- Dimensions: 185 x 95 x 50 mm (7.28 x 3.74 x 1.97 in)
- Weight: 1185 g (2.61 lbs)
Manufacturer:
Varga System GmbH, Hainkämpe 5, 28832 Achim, Germany
Email: info@varga-system.com
Warning Notes:
Working on the phase angle controller poses a risk of fatal electric shock. Installation, connection and maintenance must only be carried out by qualified electricians. The device must be completely disconnected from the mains before opening or connecting. Improper installation or operation outside the specified rated voltage (230 V~) can lead to overheating, fire hazard or damage to the machine. The controller must not be operated if there is visible damage, moisture or loose connections.
Safety Instructions:
The phase angle controller may only be used in the Varga table saws designed for this purpose (VA 11, VA 21-15, VA 31-15). Before commissioning, check all electrical connections to ensure they are secure and correctly wired. The device must be operated in a dry, clean and well-ventilated environment. Sufficient heat dissipation must be ensured to prevent overheating.
Intended Use:
Used to regulate motor power and suppress interference in Varga table saws VA 11, VA 21-15 and VA 31-15.