Teflon Sheet 500x400mm
- Teflon Sheet
- Protects heating plate
- Improves heat distribution
- 130 micrometers thick
Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com
Warning Notes:
Improper handling of cut edges can lead to cuts. Overheating of the film above the recommended temperatures can cause material damage or smoke development. Folding or creasing of the film can impair its function.
Safety Instructions:
Teflon foil should not be permanently heated above 260°C to prevent damage or decomposition. Store the foil flat and at moderate temperatures to avoid wrinkling. Ensure good ventilation during use.
Intended Use:
The product is designed to protect heating plates and improve heat distribution in hot pressing and sublimation processes.
Prices are only available upon verified registration on this website
Product number:
723054
Customers also bought
Product number:
61507101
Marking Stick, white #507101
- Highlighter, fill-in paint
- For small engravings
- Paint stays flexible
- Mark temperature resistance 260°C
- Color white
Product number:
61507102
Marking Stick, black #507102
- Highlighter, fill-in paint
- For small engravings
- Paint stays flexible
- Mark temperature resistance 260°C
- Color black
Product number:
723125
Heat resistant Tape 25mm x 66m
- Heat-resistant adhesive tape
- For fixing of transfers
- 90 micrometers thick
- Width 25 mm
- Length 66 m
Product number:
61579990114
Adhesive Transfer Tape 14mmx50m
- High initial adhesion (tack)
- High shear strength
- Resistance to ageing, weathering and UV-radiation
- Resistance to the influence of chemicals and solvents
- 14 mm x 50 m
Product number:
6150114
markSolid 114 Aerosol Spray, 300ml
- Creating black marks on a variety of metal
Last seen products
Product number:
43LZ901030H
LaserAcryl 3
- Laser engraving and cutting
- Rotary engravable
- UV stable
- Microthin surface layer for detailed engraving
Product number:
72UNI5858
ChromaLuxe Panel, Arch top panel w/ easel 127x178mm
- High-gloss white surface
- With curvature
- Images in photo quality
- Size 127 x 178 mm
- Thickness 6 mm
Product number:
62R1A030205
1 Flute Router-Mill 3,00 x 38mm / 2,0mm
- 1 Flute Router-Mill
- For cutting aluminum & soft metals
- Spiral O-flute
- Polished flute
- Tip width 2,0 mm
- 3,0 x 38 mm
- Length of cut 5 mm
Product number:
932020
Lasercork 2,0 mm (fine-grained) 610 x 305 mm
- Fine grained cork granulate for precise laser engraving
- Smooth and homogeneous surface
- Sustainable, environmentally friendly raw material
- Ideal for promotional gifts and personalised items
Product number:
778007
Leatherette 610x305mm rustic/gold
- PU Leatherette
- 610x305mm
- 1,2mm Thickness
- Laserable
- Water resistant
Product number:
39511006
Laserable Brass
- Laser markable brass
- Allows to create brass marks on black
- Available in 0,6 mm thickness