Plastic Bender IC200-1300mm

Bending of thermoplastics polymers
1300 mm heating length
Temperature adjustable
Water resistant and scratch-proof surface
Top and bottom heat
Material thickness from 0,4 to 15 mm
Inner radius from 0,2 to 10 mm

Suitable for all thermoplastic materials such as acrylic glass, styrene, polycarbonate, PETG, polystyrene, PVC, etc. The temperature adjustment is infinitely variable. Material thickness from 0,4 to 15 mm. Inner radius from 0,2 to 10 mm.

Features:
- Working widths: Up to 1300 mm
- Detachable endstop from 12 to 270 mm
- Side limit and endstop
- Water resistant and scratch-proof surface
- Top and bottom heat
- Air pressure adjusted top heat
- Heating wire adjustable from -8 mm to 0 mm
- Temperature is infinitely adjustable

Specifications:
- Dimensions: W 1500 x L 630 x H 250 mm
- Weight: 32 kg
- 230V 50HZ 660W

Manufacturer i-concept. Made in Germany
Manufactured in accordance with ISO 9001
Datasheet IC200-1300mm

Manufacturer:
i-concept GmbH & Co. KG, Harkortstraße 22, 48565 Steinfurt-Borghorst, Germany
E-mail: mail@i-concept.com

Warning Notes:
The device may get hot during operation. Risk of burns from touching the heating wires or adjacent surfaces. Avoid working near flammable materials. Fire. Avoid contact with the heating wire. Direct contact can cause serious injuries. Always disconnect the device from the power supply when it is not in use. Improper handling of fuses can cause damage or accidents.

Safety Instructions:
Read and follow the operating instructions before use. Use only in dry environments. Avoid contact with liquids. Check the device regularly for damage and function. Working with unsuitable materials is to be avoided. Only use permissible plastics.

Intended Use:
The product is intended for bending thermoplastics.

Prices are only available upon verified registration on this website