LaserUltra
- Thin laser engraving material
- Microthin surface layer
- Available in 0,5 mm thickness
LaserUltra is a flexible, laser-capable engraving material. The material thickness of only 0.5 mm can be easily cut with a laser. Its micro-thin surface allows very fine engravings without shadowing. Ideal for control cabinet lettering and cup base signs. Available in 7 colours.
Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com
Warning Notes:
Caution! Flammable material. Health-hazardous fumes when heated! Risk of breakage with improper handling.
Safety Instructions:
Keep away from heat sources. Ensure adequate room ventilation during storage and use. Use a local exhaust system in areas with dust and smoke development.
Intended Use:
The product is intended for the production of signs.
Colours
matte
glossy
Capabilities
- Laser
- Laser Vector Cuts
- Rotating Carbide
- Hot Stamps
- Screen Prints
- Drills
- Bonds
- Saws
- Shears
- Punch
Properties
| Finish: | Matte/Gloss |
|---|---|
| Cutting Depth: | 0,1 mm |
| Thicknesses: | 0,5 mm |
| Standard Format: | 610 x 610 mm |
| Temp. max: | 80 °C |
| Engraving material: | Impact Acrylicl |
- UV Stable
- Flexible
- Break-Proof
Usage
- Interior
- Exterior
Customers also bought
Aluminium Oxide 96ml
- Blackening solution for aluminium alloys
- Bottle can contents 96 ml
Magnet Badge GT40 #987-B59
- Two round rare earth magnets
- High magnetic power
- Base is made of nickel-plated steel plate
- 45 x 13 mm
- Zinc-plated steel plate w/ foam pad
Adhesive Transfer Tape 19mmx50m
- High initial adhesion (tack)
- High shear strength
- Resistance to ageing, weathering and UV-radiation
- Resistance to the influence of chemicals and solvents
- 19 mm x 50 m
Diamant Gravers 4,36x150mm 120°
- Diamond Graver
- Non-rotating tool
- Diamond angle: 120°
- Surface marking only
- 4,36 x 150,0 mm
Laser Rubber "No Smell", DIN A4, Grey
- Free of smell
- Alcohol and water based inks resistance
- Outstanding engraving and impression quality
- Hardness: 60 Sh
Metal Trophy "Laser" 280mm #5078123C
- Front panel made of black anodized aluminum
- Designed for laser and rotary engraving
- Size 280 mm