LaserSatin

  • Laser engraving and cutting
  • Rotary engravable
  • Slightly brusged, non-glare finish
  • Microthin surface layer
  • High-value metal optic

Its surface has a slightly brushed structure, similar to the engraving material PLY 1. The UV-resistant, micro-thin coating allows very fine engravings without shadowing and is therefore also ideally suited for less powerful laser engraving machines.

Product Information:
LaserSatin is a two-layer engraving material for high contrast lettering, signs and technical identification. Key characteristics include a microthin cap layer for fine text and detailed logos. The surface finish is particularly effective in the colours brass and platinum (LZS-999-016 / LZ-998-016). The high-gloss, polished surface gives these colours a precious metallic character.

Application and Processing:
Laser power, speed, frequency and focus should be adjusted so that the surface layer is cleanly removed without unnecessarily engraving too deeply into the substrate. For small lettering and detailed designs, consistent focus and a flat material surface are particularly important. Before processing larger quantities, we recommend testing the parameters using the actual colour combination and material thickness.

Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com

Warning Notes:
Caution! Flammable material. Health-hazardous fumes when heated! Risk of breakage with improper handling.

Safety Instructions:
Keep away from heat sources. Ensure adequate room ventilation during storage and use. Use a local exhaust system in areas with dust and smoke development.

Intended Use:
The product is intended for the production of signs.


Colours

satined
LZS-901 - brushed black/white
LZS-902 - brushed white/black
LZS-903 - brushed red/white
LZS-904 - brushed blue/white
LZS-905 - brushed applegreen/white
LZS-906 - brushed yellow/black
high-glossy, satined
LZS-998 - brushed platinum/black
LZS-999 - brushed brass/black

Capabilities

  • Laser
  • Laser Vector Cuts
  • Rotating Carbide
  • Hot Stamps
  • Screen Prints
  • Drills
  • Bonds
  • Saws
  • Shears
  • Punch

Properties

Finish: Slightly Brushed
Cutting Depth: 0,1 mm
Thicknesses: 1,6 mm
Standard Format: 610 x 610 mm
Temp. max: 80 °C
Engraving material: Impact Acrylic
  • UV Stable (except Brass)
  • Flexible
  • Break-Proof

Usage

  • Interior
  • Exterior (except messing)
Laser Vector Cut
Laserable
Rotary Engravable
Exterior Signage
Interior Signage
Weatherproof
Reverse Engravable

Customers also bought

Product number: 46SH1630

Plywood Poplar 600x300x3mm

  • Low smoke emission
  • Suitable for laser engraving and painting
  • Surfaces are untreated
  • Plywood made of Poplar
Product number: 6150755

Aluminium Oxide Plus 96ml

  • For Blackening Engravings on Anodized Aluminium
  • Deep, Permanent Black Markings
  • Improved Formula
  • Reduced Hazard Classification
Product number: 90400

Laser Rubber "No Smell", DIN A4, Grey

  • Odorless Laser Processing
  • Excellent Engraving Quality
  • Clean Stamp Impressions
  • High Ink Resistance
  • Suitable for Many Stamp Types
Product number: 90500

Laser Rubber "Standard 50W", DIN A4, Grey

  • Ideal for 50 W COâ‚‚ Lasers
  • Suitable for All Stamp Types
  • Excellent Engraving Quality
  • High Ink Resistance
  • Suitable for Single and Multi Color Stamps
Product number: 619990150

LaserEdge f. paint fill applications

  • Laser mask for paint fill applications
  • Sharp definition for painting
  • Non-residue
  • Weeds easily after lasering
  • Size 150 mm x 66 m
Product number: 771408

Long Bottle Opener 180x40mm black/silver

  • Long Bottle Opener
  • 180x40mm
  • Leatherette
  • Laserable
  • Water resistant