LaserReverse
- Laserable
- Rotary Engravable
- UV stable and outdoor weatherable
- Microthin surface layer
- Non-glare matte finish
- Made for reverse engraving
- 1,6 mm / 3,0 mm thicknesses
LaserReverse is designed for laser engraving. The inscription is in mirror lettering on the back. Its micro-thin coating on the back allows very fine engravings and is therefore also suitable for less powerful laser engraving machines. We recommend that the lettering be coloured with "System3 Acrylic Paints" after engraving. LaserReverse is weather-resistant and suitable for outdoor use. The surface is matt and low-reflection.
Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com
Warning Notes:
Caution! Flammable material. Health-hazardous fumes when heated! Risk of breakage with improper handling.
Safety Instructions:
Keep away from heat sources. Ensure adequate room ventilation during storage and use. Use a local exhaust system in areas with dust and smoke development.
Intended Use:
The product is intended for the production of signs.
Colours
matte
glossy
Capabilities
- Laser
- Laser Vector Cuts
- Rotating Carbide
- Hot Stamps
- Screen Prints
- Drills
- Bonds
- Saws
- Shears
- Punch
Properties
| Finish: | Matte |
|---|---|
| Cutting Depth: | 0,2mm |
| Thicknesses: | 1,6 / 3,0 mm |
| Standard Format: | 610 x 610 mm |
| Temp. max: | 80 °C |
| Engraving material: | Impact Acrylicl |
- UV Stable
- Flexible
- Break-Proof
Usage
- Interior
- Exterior
Customers also bought
Magnet Badge MAG 01 #987-001
- For self-manufacture of name badges
- Very high magnetic power
- Base is made of plastic
- 45 x 13 mm
- Zinc-plated steel plate w/ foam pad
Magnet Badge MAG 02 #987-002
- For self-manufacture of name badges
- High magnetic power
- Base is made of plastic
- 45 x 12 mm
- Zinc-plated steel plate w/ foam pad
- Low weight
Laser Rubber "Standard 50W", DIN A4, Grey
- Suitable for any type of stamp
- Alcohol and water based inks resistance
- Outstanding engraving and impression quality
- Hardness: 53 Sh
- CO2 Laser 50 W
LaserEdge f. paint fill applications
- Laser mask for paint fill applications
- Sharp definition for painting
- Non-residue
- Weeds easily after lasering
- Size 150 mm x 66 m
Tissue Tape 244mm x 100m
- Low tack, paper mask
- Made for laser engraving, crystal etchings, and letter transferring
- Protects foil from edge burn while laser engraving
- Size 244 mm x 100 m
Last seen products
LaserAcryl 1
- Laser engraving and cutting
- Rotary engravable
- UV stable
- Microthin surface layer
- Matte, brushed or glossy finish
- Ideal for industrial use
- Wide range of colours