LaserReverse

LaserReverse is designed for laser engraving. The inscription is in mirror lettering on the back.

Product Information:
LaserReverse is a layered engraving material for high contrast lettering, signs and technical identification. Key characteristics include a microthin cap layer for fine text and detailed logos, a matt or low reflection surface and reverse engraving with the visible face protected. The engraving material is explicitly suitable for outdoor applications. The surface is matt and low-reflection.

Application and Processing:
Laser power, speed, frequency and focus should be adjusted so that the surface layer is cleanly removed without unnecessarily engraving too deeply into the substrate. For small lettering and detailed designs, consistent focus and a flat material surface are particularly important. Before processing larger quantities, we recommend testing the parameters using the actual colour combination and material thickness. Its micro-thin coating on the back allows very fine engravings and is therefore also suitable for less powerful laser engraving machines. We recommend that the lettering be coloured with "System3" Acrylic Paints after engraving. LaserReverse is weather-resistant and suitable for outdoor use.

Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com

Warning Notes:
Caution! Flammable material. Health-hazardous fumes when heated! Risk of breakage with improper handling.

Safety Instructions:
Keep away from heat sources. Ensure adequate room ventilation during storage and use. Use a local exhaust system in areas with dust and smoke development.

Intended Use:
The product is intended for the production of signs.