LaserFoil
- Flexible, thin laser engraving material
- Microthin surface layer
- Designed for the laser engrave
- Self-adhesive
- Available in 0,2 mm thickness
The material thickness of 0.2 mm allows it to be used on curved surfaces. LaserFolie is specially developed for laser engraving and laser cutting and comes with a self-adhesive backing.
Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com
Warning Notes:
Caution! Flammable material. Health-hazardous fumes when heated! Risk of breakage with improper handling.
Safety Instructions:
Keep away from heat sources. Ensure adequate room ventilation during storage and use. Use a local exhaust system in areas with dust and smoke development.
Intended Use:
The product is intended for the production of signs.
Prices are only available upon verified registration on this website
Colours
LaserFoil - Interior - matte
LaserFoil - Interior - glossy
LaserFoilPlus - Exterior - matte
LaserFoilPlus - Exterior - glossy
Capabilities
- Laser
- Laser Vector Cuts
- Rotating Carbide
- Hot Stamps
- Screen Prints
- Drills
- Bonds
- Saws
- Shears
- Punch
Properties
| Finish: | Matte/Gloss |
|---|---|
| Cutting Depth: | 0,05 mm |
| Thicknesses: | 0,2 mm |
| Standard Format: | 610 x 305 mm |
| Temp. max: | 80 °C |
| Engraving material: | Acryl |
- UV Stable
- Flexible
- Break-Proof
Usage
- Interior
- Exterior
Customers also bought
Product number:
6150114
markSolid 114 Aerosol Spray, 300ml
- Creating black marks on a variety of metal
Product number:
90400
Laser Rubber "No Smell", DIN A4, Grey
- Free of smell
- Alcohol and water based inks resistance
- Outstanding engraving and impression quality
- Hardness: 60 Sh
Product number:
90500
Laser Rubber "Standard 50W", DIN A4, Grey
- Suitable for any type of stamp
- Alcohol and water based inks resistance
- Outstanding engraving and impression quality
- Hardness: 53 Sh
- CO2 Laser 50 W
Product number:
6150202
CerMark ULTRA Aerosol Spray, 56g
- Spray can contents 56 g
- Stone / brick / slate marking
- Tile / glass marking
- No hard setting
- Non-clogging spray nozzle
- Metal marking
- Creating black marks
- Full laser speed
Product number:
612441
Tissue Tape 244mm x 100m
- Low tack, paper mask
- Made for laser engraving, crystal etchings, and letter transferring
- Protects foil from edge burn while laser engraving
- Size 244 mm x 100 m
Product number:
55386507
Ornamental Plate Type 386 #507
- For Signage of paintings, saddles and honorary plates
- Signs out of brass
- 90x18 mm
- brass brushed