LaserAcrylEco

Laser engraving and cutting
Rotary engravable
Microthin surface layer
Excellent for interior signage

LaserAcrylEco is an economical engraving material designed for laser engraving. Its ultra-thin coating enables fine engravings without shadowing and ensures clean edges.

Product Information:
LaserAcrylEco is a two-layer engraving material for high contrast lettering, signs and technical identification. Key characteristics include a microthin cap layer for fine text and detailed logos. With a material thickness of 1.3 mm, it is suitable for cost-efficient indoor applications.

Application and Processing:
Laser power, speed, frequency and focus should be adjusted so that the surface layer is cleanly removed without unnecessarily engraving too deeply into the substrate. For small lettering and detailed designs, consistent focus and a flat material surface are particularly important. Before processing larger quantities, we recommend testing the parameters using the actual colour combination and material thickness. It is well suited for both raster and vector engraving and delivers consistent results.

More about Knowledge & Processing ›

Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com

Warning Notes:
Caution! Flammable material. Health-hazardous fumes when heated! Risk of breakage with improper handling.

Safety Instructions:
Keep away from heat sources. Ensure adequate room ventilation during storage and use. Use a local exhaust system in areas with dust and smoke development.

Intended Use:
The product is intended for the production of signs.

Prices are only available upon verified registration on this website