LaserAcryl 3
- Laser engraving and cutting
- Rotary engravable
- UV stable
- Microthin surface layer for detailed engraving
LaserAcryl 3 is specially developed for laser engraving and features a UV-resistant, ultra-thin coating. This allows for fine, high-contrast engravings without shadowing and ensures clean, precise edges. With a material thickness of 3.0 mm, LaserAcryl 3 is ideal for demanding environments where durability and stability are required. The optimized material composition delivers excellent results for both raster and vector engraving, as well as clean cutting edges during laser cutting.
Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com
Warning Notes:
Caution! Flammable material. Health-hazardous fumes when heated! Risk of breakage with improper handling.
Safety Instructions:
Keep away from heat sources. Ensure adequate room ventilation during storage and use. Use a local exhaust system in areas with dust and smoke development.
Intended Use:
The product is intended for the production of signs.
Colours
matte
Capabilities
- Laser
- Laser Vector Cuts
- Rotating Carbide
- Hot Stamps
- Screen Prints
- Drills
- Bonds
- Saws
- Shears
- Punch
Properties
| Finish: | Matte |
|---|---|
| Cutting Depth: | 0,1 mm |
| Thicknesses: | 3,0 mm |
| Standard Format: | 610 x 610 mm |
| Temp. max: | 80 °C |
| Engraving material: | Impact Acrylic |
- UV Stable
- Flexible
- Break-Proof
Usage
- Interior
- Exterior
Customers also bought
Douple Post Bar w/Clutches #907-230
- Douple Post Bar w/ Clutches
- Base size 51 x 10 mm
- Not self-adhesive
- For fastening name badges
Tissue Tape 244mm x 100m
- Low tack, paper mask
- Made for laser engraving, crystal etchings, and letter transferring
- Protects foil from edge burn while laser engraving
- Size 244 mm x 100 m
Magnet Badge MAG 01 #987-001
- For self-manufacture of name badges
- Very high magnetic power
- Base is made of plastic
- 45 x 13 mm
- Zinc-plated steel plate w/ foam pad
Marking Stick, black #507102
- Highlighter, fill-in paint
- For small engravings
- Paint stays flexible
- Mark temperature resistance 260°C
- Color black
Laser Rubber "No Smell", DIN A4, Grey
- Free of smell
- Alcohol and water based inks resistance
- Outstanding engraving and impression quality
- Hardness: 60 Sh
LaserEdge f. paint fill applications
- Laser mask for paint fill applications
- Sharp definition for painting
- Non-residue
- Weeds easily after lasering
- Size 150 mm x 66 m