LaserAcryl 3

Laser engraving and cutting
Rotary engravable
UV stable
Microthin surface layer for detailed engraving

LaserAcryl 3 was specially developed for precise laser engraving and laser cutting. With a material thickness of 3.0 mm, it is particularly suitable for stable signs, technical markings and applications requiring high dimensional stability and durability.

Product Information:
LaserAcryl 3 is a two-layer engraving material with a UV-resistant, ultra-thin surface layer. Its construction enables fine, high-contrast engravings with clean contours as well as detailed lettering and logos. The material is suitable for raster engraving, vector engraving and precise laser cutting.

Application and Processing:
Laser power, speed, frequency and focus should be adjusted so that the surface layer is cleanly removed without unnecessarily engraving too deeply into the substrate. For small lettering and detailed designs, consistent focus and a flat material surface are particularly important. Before processing larger quantities, we recommend testing the parameters using the actual colour combination and material thickness.

More about Knowledge & Processing ›

Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com

Warning Notes:
Caution! Flammable material. Health-hazardous fumes when heated! Risk of breakage with improper handling.

Safety Instructions:
Keep away from heat sources. Ensure adequate room ventilation during storage and use. Use a local exhaust system in areas with dust and smoke development.

Intended Use:
The product is intended for the production of signs.

Prices are only available upon verified registration on this website

Colours

matte

Capabilities

Laser
Laser Vector Cuts
Rotating Carbide
Hot Stamps
Screen Prints
Drills
Bonds
Saws
Shears
Punch

Properties

Finish:	Matte
Cutting Depth:	0,1 mm
Thicknesses:	3,0 mm
Standard Format:	610 x 610 mm
Temp. max:	80 °C
Engraving material:	Impact Acrylic

UV Stable
Flexible
Break-Proof

Usage

Interior
Exterior

Bell Button Stainless Steel

Type PROTACT 250 VA
Suitable for installation in door stations, door plates or industrial applications
Max. plate thickness 6 mm
Hole in the plate 16 mm
IP 54 ( when installed in vertical position)
Key button stainless steel
Key sleeve stainless steel