LaserAcryl 2

Laser engraving and cutting
Rotary engravable
Microthin surface layer
Excellent for interior signage

LaserAcryl 2 was specially developed for precise laser engraving in indoor applications. The material is particularly suitable for signs, nameplates and industrial markings, and enables fine, high-contrast engravings with clean contours.

Product Information:
LaserAcryl 2 is a two-layer engraving material with a particularly thin surface layer. This allows fine lettering, detailed logos and high-contrast markings to be produced with precision. The material is suitable for signs, labelling and technical identification.

Application and Processing:
Laser power, speed, frequency and focus should be adjusted so that the surface layer is cleanly removed without unnecessarily engraving too deeply into the substrate. For small lettering and detailed designs, consistent focus and a flat material surface are particularly important. Before processing larger quantities, we recommend testing the parameters using the actual colour combination and material thickness.

More about Knowledge & Processing ›

Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com

Warning Notes:
Caution! Flammable material. Health-hazardous fumes when heated! Risk of breakage with improper handling.

Safety Instructions:
Keep away from heat sources. Ensure adequate room ventilation during storage and use. Use a local exhaust system in areas with dust and smoke development.

Intended Use:
The product is intended for the production of signs.

Prices are only available upon verified registration on this website