LaserAcryl 1
- Laser engraving and cutting
- Rotary engravable
- UV stable
- Microthin surface layer
- Matte, brushed or glossy finish
- Ideal for industrial use
- Wide range of colours
LaserAcryl 1 is a proven engraving material for fine laser engraving and precise vector cutting. The UV-resistant, ultra-thin surface layer enables detailed engravings with clean contours and reduces shadowing.
Product Information:
LaserAcryl 1 is a two-layer engraving material with a particularly thin surface layer. This allows fine lettering, detailed logos and high-contrast markings to be produced with precision. The material is suitable for signs, labelling and technical identification. The material is suitable for both indoor and outdoor use and is available in numerous colour combinations.
Application and Processing:
Laser power, speed, frequency and focus should be adjusted so that the surface layer is cleanly removed without unnecessarily engraving too deeply into the substrate. For small lettering and detailed designs, consistent focus and a flat material surface are particularly important. Before processing larger quantities, we recommend testing the parameters using the actual colour combination and material thickness.
Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com
Warning Notes:
Caution! Flammable material. Health-hazardous fumes when heated! Risk of breakage with improper handling.
Safety Instructions:
Keep away from heat sources. Ensure adequate room ventilation during storage and use. Use a local exhaust system in areas with dust and smoke development.
Intended Use:
The product is intended for the production of signs.
Colours
matte
glossy
Capabilities
- Laser
- Laser Vector Cuts
- Rotating Carbide
- Hot Stamps
- Screen Prints
- Drills
- Bonds
- Saws
- Shears
- Punch
Properties
| Finish: | Matte/Gloss |
|---|---|
| Cutting Depth: | 0,1 mm |
| Thicknesses: | 1,6 mm |
| Standard Format: | 610 x 610 mm |
| Temp. max: | 80 °C |
| Engraving material: | Impact Acrylic |
- UV Stable (except gold)
- Flexible
- Break-Proof
Usage
- Interior
- Exterior (except gold)
Customers also bought
Aluminium Oxide Plus 96ml
- For Blackening Engravings on Anodized Aluminium
- Deep, Permanent Black Markings
- Improved Formula
- Reduced Hazard Classification
CerMark ULTRA Spray Can, 56g
- CerMark ULTRA Spray Can
- Black Laser Marking
- Stone, Brick and Slate Marking
- Tile and Glass Marking
- For Many Metals
- Easy Parameter Setup
- No Spray Nozzle Clogging
- Contents 56 g
Laser Rubber "No Smell", DIN A4, Grey
- Odorless Laser Processing
- Excellent Engraving Quality
- Clean Stamp Impressions
- High Ink Resistance
- Suitable for Many Stamp Types
Solid Wood Oak, 5 mm, 600 x 300 mm, oiled
- Minimum possible number of slats
- Low distortion when stored correctly
- Hardly any glue joints
- Homogeneous optics
- Even the finest details can be cut out
Plywood Poplar 600x300x3mm
- Low smoke emission
- Suitable for laser engraving and painting
- Surfaces are untreated
- Plywood made of Poplar