Laser Rubber "Eco", DIN A4, Green

The low dust generation makes processing easier and reduces cleaning effort after laser engraving. One side of the stamp rubber has an intentionally rough surface. This allows the stamp ink to be absorbed particularly well, resulting in even, clear stamp impressions.

With a thickness of 2.3 mm and a hardness of 60 Shore A, the Eco laser rubber is suitable for a wide range of professional stamp making applications.

Technical Data

Material: Natural rubber
Color: Green
Format: DIN A4
Thickness: 2.3 mm
Hardness: 60 Shore A
Processing: Engraving and cutting with a CO₂ laser
Application: Production of stamp plates

Application

The stamp rubber is engraved with a CO₂ laser and then cut to the desired size. Thanks to its material properties, it is suitable for both simple text stamps and designs with fine lines and details.

Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com

Warning Notes:
Caution! Flammable material. Harmful fumes when heated! Laser cutting can release irritating particles.

Safety Instructions:
Keep away from heat sources. Ensure sufficient room ventilation during storage and use. Use a local exhaust system in the area of dust and smoke. Disposal in accordance with local regulations.

Intended Use:
The product is intended for the production of stamps using laser cutting technology.