Hold-down Mat PowerMat®-Pro

2-sided multi-purpose hold-down mat
Designed for laser and CNC engraving
Non-clamp set-up method
Re-usable and longlive

Double-sided adhesive mat for attaching material to engraving and laser system tables. Also suitable for UV and solvent printers. Product is reusable, very durable and permanently self-adhesive.

How do I attach the PowerMat® to the engraving table?
The PowerMat's® adhesive coating on both sides connects the underside to the engraving table, eliminating the need for additional clamping.

How is the PowerMat® cleaned?
Over a longer period of time, dust, traces of gunpowder and chips can settle on the surface of the adhesive mat. The impurities impair the adhesive effect due to the smaller contact surface. All PowerMat® adhesive mats can be cleaned under running water with a soft sponge. The addition of washing-up liquid also cleans the surface of oil traces. With a squeegee, the drying process can be accelerated by pulling off the water droplets. The use of cloths and paper should be avoided, as this can cause fibres to adhere to the adhesive surface.

How is the PowerMat® cut?
All PowerMat® adhesive mats can be cut with hand lever scissors. If necessary, protect the adhesive surface under the hold-down device with a piece of engraving material.

Which operator of a laser engraving system does not know the problem of stretching wavy self-adhesive engraving material flat in order to avoid focus problems during marking. With the new PowerMat-Pro® adhesive layer, the adhesion for self-adhesive material has now been specially improved with a silicone backing paper (3M adhesive backing).

Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com

Warning Notes:
Over a longer period of time, dust, traces of gunpowder and chips can stain the adhesive mat. Dirt reduces the adhesive effect due to a smaller contact surface. Cloths and paper leave behind fibers that can interfere with the function of the adhesive surface.

Safety Instructions:
Clean the adhesive mat under running water with a soft sponge. Use dish soap to thoroughly remove traces of oil. No abrasive detergents or tools to avoid damage to the surface.

Intended Use:
The product is intended for attaching materials/objects to engraving and laser system tables.

Prices are only available upon verified registration on this website

Variants