Go to homepage
Go to homepage

Diamant Gravers 6,35x150mm 120°

Diamant Gravers 6,35x150mm 120°
  • Diamond Graver
  • Non-rotating tool
  • Diamond angle: 120°
  • Surface marking only
  • 6,35 x 150,0 mm
Diamond Graver non-rotating tool intended for scratch engraving of trophy brass and aluminum. Suitable for surface marking only .
Diamond angle: 120°
Shank Diameter: 6,35 mm Length: 150,0 mm


Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com

Warning Notes:
Attention: Sharp edges! Risk of injury in case of direct contact. Do not use on unsuitable materials such as stainless steel. Do not continue to use damaged tools.

Safety Instructions:
Use only for scratch engravings on suitable materials such as brass and aluminum. Store the tool in a protective case to prevent damage. Use only in designated machines. Use a local exhaust system in the area of dust and particle development.

Intended Use:
The product is designed for precise scratch engraving on brass and aluminum surfaces.

Minimum order quantity 1
Maximum order quantity 10000
Product number: 6255114

Last seen products

Solid Wood Alder, 5 mm, 600 x 300 mm, oiled
Product number: 46VH1450

Solid Wood Alder, 5 mm, 600 x 300 mm, oiled

  • Minimum possible number of slats
  • Low distortion when stored correctly
  • Hardly any glue joints
  • Homogeneous optics
  • Even the finest details can be cut out
Diamant Gravers 3,17x28,5mm 120°
Product number: 6258140

Diamant Gravers 3,17x28,5mm 120°

  • Diamond Graver
  • Non-rotating tool
  • Diamond angle: 120°
  • Surface marking only
  • 3,17 x 28,5 mm
Leatherette 610x305mm blue/silver
Product number: 778002

Leatherette 610x305mm blue/silver

  • PU Leatherette
  • 610x305mm
  • 1,2mm Thickness
  • Laserable
  • Water resistant
Product Details
Coaster Square 100x100mm dark brown/black
Product number: 771311

Coaster Square 100x100mm dark brown/black

  • Coaster
  • 100x100mm
  • Square
  • Leatherette
  • Laserable
  • Water resistant
Product Details
Leatherette 610x305mm light brown/black
Product number: 778004

Leatherette 610x305mm light brown/black

  • PU Leatherette
  • 610x305mm
  • 1,2mm Thickness
  • Laserable
  • Water resistant
Product Details
DuraBlack® is CO2 laser markable aluminum for durable, on-demand marking for harsh operating environments.
Product number: 365976

DuraBlack
Sheet 5976 0.51 mm 305 mm x 254 mm black matte

Laser Vector Cut
Laserable
Rotary Engravable
Exterior Signage
Interior Signage
Weatherproof
Reverse Engravable
  • CO2 laser markable aluminium
  • Durable marking
  • Meets several specifications
  • Resistant to sunlight (UV-radiation), high-temperatures, saltspray and chemical exposure
  • Abrasion-resistant
  • Optionally with 3M VHB 9460 self-adhesive film
Product Details