CerMark LMM6000, 500g

LMM6000 Concentrate
Black Laser Marking
For Many Metals
Contents 500 g

LMM6000 is a general purpose laser marking inks and is recommended for creating black marks on a variety of metals. LMM6000 has been specially designed to dry in a hard coat which can be handled prior to laser marking without rubbing off. This allows parts coated with LMM6000 to be stored, moved or stacked prior to laser marking.
It can be used on a variety of bare metal substrates including stainless steel, brass, aluminum, titanium, tin, copper, nickel and many more.
Foam brush (hand) application:
Ratio of 1:2 (1 part in volume of LMM6000, 2 parts in volume of denatured alcohol) is recommended.
Air brush application:
Ratio of 1:2 (1 part in volume of LMM6000, 2 parts in volume of denatured alcohol) is recommended.

Bottle contents: 500 g

Manufacturer:
Vibrantz GmbH, Gutleutstr. 215, 60327 Frankfurt a. Main, Germany
E-mail: media@vibrantz.com

Signal word:
Danger

GHS02 GHS08 GHS07

Warning Notes:
Highly flammable liquid and vapour. Causes severe eye irritation. May irritate the respiratory tract. Can probably cause cancer.

Safety Instructions:
Obtain special instructions before use. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Avoid inhaling dust/smoke/gas/mist/steam/aerosol. Wear protective gloves / protective clothing / eye protection / face protection.

Intended Use:
The product is intended for decorative coating with a laser system.

Prices are only available upon verified registration on this website