Configurable
Bevel Cutter 45° 3,17x115mm
- Bevel Cutter
- Cutting angle 45°
- Suitable for beveling machines
- 3,17 x 115 mm
Beveling is the process of creating a sloped edge on a plate. A tapered cutter with a 45° cutting angle is the most popular choice because it creates a more pronounced cut (more of the core of the material is visible).
Shank Diameter 3,17 mm
Length: 115 mm
Cutting angle : 45°
Shank Diameter 3,17 mm
Length: 115 mm
Cutting angle : 45°
Customers also bought:
LaserFoil
Configurable
Standard Cutter 3,00x50mm - Solid Carbide
- Standard Cutter
- 3,00 x 50 mm
- 9 available tip sizes
Configurable
HardwearPlus - Matte finish
- UV stable
- Microthin surface layer
- Perfect for fine detail engraving
Configurable
HSS-Cutter 3,17x115mm - High Speed Steel Engraving Cutters
- 3,17 x 115 mm
- 9 available tip sizes
Aluminium Oxide 96ml - Blackening solution for aluminium alloys
- Bottle can contents 96 ml
Item No.: 6150755
Double-sided acrylic adhisive Tape 12 mm x... - High performance permanent bond
- Long aging, UV resistant
- Withstands outdoor exposure
- Excellent for continuous runs, die-cutting
Item No.: 61579990127
Magnet Badge MAG 01 #987-001 - For self-manufacture of name badges
- Very high magnetic power
- Base is made of plastic
- 45 x 13 mm
Item No.: 60987001
Configurable
Engraving Brass (polished) - Polished finish
- Coated nylon paint against oxidation
- Can be diamond drag or rotary engraved
Configurable
Aluminium G (matt) - Double-sided anodised aluminium
- Matte finish
- Alloy ALMG3
- Premium quality
Configurable
Hold-down Mat PowerMat®-Pro - 2-sided multi-purpose hold-down mat
- Designed for laser and CNC engraving
- Non-clamp set-up method
- Re-usable and longlive
Drive Beltt f. VXM - Timing Belt for Engraving Maschine
- Designed for VXM
- Yellow
- Total length 420 mm
Item No.: 6270020
Vinyl Cutting Blade SUMMAGRAPHICS 36° - Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting general signage vinyl 0,5 - 3,0 mm thick
- Offset 0,45 mm
Item No.: 63AVBSUM001
1 Flute Router-Mill 3,00 x 38mm / 2,0mm - 1 Flute Router-Mill
- For cutting aluminum & soft metals
- Spiral O-flute
- Polished flute
Item No.: 62R1A030205
Wide-Cut Cutter 4,36x165mm - Wide Cut Engraving Cutter
- Tip size 6,35 mm
- 4,36 x 165 mm
Item No.: 6258206
End Mill - Two Flutes 3,0x37mm / 3,0mm - 2 Flutes End Mill
- Spiral O-flute
- Tip width 3,0 mm
- 3,00 x 37 mm
Item No.: 62581033
Configurable
Standard Cutter 3,17x115mm - Solid Carbide
- Standard Cutter
- 3,17 x 115 mm
- 9 available tip sizes
Marking Stick, black #507102 - Highlighter, fill-in paint
- For small engravings
- Paint stays flexible
- Mark temperature resistance 260°C
Item No.: 61507102
Adhesive Transfer Tape, Foam 19 mm x 66 m - Adhesive Transfer Tape
- 19 mm x 66 m
- Interior and Exterior
- For applications on smooth and rough surfaces
Item No.: 615799919
Adhesive Transfer Tape 19mmx50m - High initial adhesion (tack)
- High shear strength
- Resistance to ageing, weathering and UV-radiation
- Resistance to the influence of chemicals and solvents
Item No.: 61579990119
Adhesive Transfer Tape 14mmx50m - High initial adhesion (tack)
- High shear strength
- Resistance to ageing, weathering and UV-radiation
- Resistance to the influence of chemicals and solvents
Item No.: 61579990114
Knurled Screw, clear #4013 - Clear knurled Screw
- Internal thread M4
- Strong long-term holding
Item No.: 604013
Suction Cup 40mm w/Screw M4x10 #4010 - Suction cup for long-term holding
- Apply to clean surfaces
- Cup diamenter 40 mm
- Screw M4 x 10 mm
Item No.: 604010
Safety pin 40x8mm w/Self-Adhesive Pad #987-222 - Safety pin
- Plastic back
- Base size 40 x 8 mm
- Self-adhesive
Item No.: 60987222
Badge Holder Exkusiv, silver, 80,5x30 mm - Plastic frame silver
- Badge Holder
- 80,5 x 30 mm
- Including self-adhesive strip
Item No.: 70BH0300601
Configurable
Engraving Brass (satined) - Satined finish
- Coated nylon paint against oxidation
- Can be diamond drag or rotary engraved
Configurable