Advice on custom plates and strips
Do you need plates or strips cut to size for a customer order but don’t have the time or means to make them yourself?
No problem. We are specialists in custom-made items. Simply order your custom plates and strips in our online shop using a configurator that guides you step by step to the finished item. You start the configurator on the details page for the engraving materials.
A custom plate or strip refers to a rectangular format that can be ordered with an all-round facetted edge, rounded corners, drilled holes or self-adhesive backing. For technical reasons, rounded corners cannot be made with an all-round facet.
Strips are available in lengths of 610 mm and 1000 mm and can be supplied with long-side facet and self-adhesive backing.
General information
-
Rounded corners can be supplied with a radius of 2/3/4/5/6/8/10 or 15 mm.
-
With a bevel, the edges are machined off at an angle of 45°. The process leaves 1/3 of the sign thickness unmachined.
-
Drilled holes with diameters from 1.5 to 11 mm can be inserted.
-
Distance from hole centre to hole centre
-
Diameter and number of holes
-
Distance from hole centre to hole centre
-
Distance of hole centre from top edge

-
Custom plates and strips are manufactured to tolerances according to DIN ISO 2768-m. Dimension limits for lengths and widths:
-
Tolerance class
Tolerance in mm for nominal dimension range in mm
more than
6,0
to 30,0more than
30,0
to 120more than
120
to 400more than
400
to 1000more than
1000
to 2000m
middle
± 0,10
± 0,20
± 0,50
± 0,80
± 1,20
If you have any questions and would like personal advice,
we are available Mondays to Thursdays from 8:00 am to 4:30 pm and on Fridays from 8:00 am to 3:30 pm on +49 (0)4232 9458-0.
We look forward to your call.