Aluminium Oxide 96ml


- Blackening solution for aluminium alloys
- Bottle can contents 96 ml
Apply a thin film of solution on the surface using a brush. Stop the chemical reaction by rinsing it with clear water.
Bottle contens: 96 ml
Safety Data Sheet Aluoxyd
Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com
Warning Notes:
Harmful if swallowed. Causes severe skin burns and severe eye damage. May cause allergy, asthma-like symptoms or breathing difficulties if inhaled. May cause allergic skin reactions. Can probably cause genetic defects. Can cause cancer if inhaled. May harm the child in the womb. Damages the respiratory system and male genitalia with prolonged or repeated exposure. Route of exposure: inhalation. Very toxic to aquatic organisms with long-term effects.
Safety Instructions:
Read and understand all safety instructions before use. Do not inhale mist/steam/aerosol. Use only outdoors or in well-ventilated rooms. Avoid release into the environment. Wear protective gloves / protective clothing / eye protection / face protection. In case of insufficient ventilation, wear respiratory protection. Call the POISON CENTER/ doctor immediately. Absorb spilled amounts. Store under lock and key. Disposal of the contents/container in accordance with local/regional/national/international regulations.
Intended Use:
Product is intended as an oxidizing agent for aluminum surfaces.
Customers also bought
markSolid 114 Aerosol Spray, 300ml
- Creating black marks on a variety of metal
Marking Stick, black #507102
- Highlighter, fill-in paint
- For small engravings
- Paint stays flexible
- Mark temperature resistance 260°C
- Color black
Tissue Tape 244mm x 100m
- Low tack, paper mask
- Made for laser engraving, crystal etchings, and letter transferring
- Protects foil from edge burn while laser engraving
- Size 244 mm x 100 m
Lacquer black 500g -UN1263-
- Nitrolaque black
- For colouring rotary engraving on metal and steel
- Fast drying
- 500 g
Marking Stick, white #507101
- Highlighter, fill-in paint
- For small engravings
- Paint stays flexible
- Mark temperature resistance 260°C
- Color white
Last seen products
Cast Acrylic Reverse







- Cast Acrylic
- 2-Ply engraving material
- Laminated cap is scratchproofed
- Weather-resistant
- Reverse engraving
Woods







- Realistic and accurate wood imitation
- Exclusive marking
- Microthin surface layer
- Perfect for fine detail engraving
- Durable micro-surface