Hold-down Mat PowerMat®-Pro
- 2-sided multi-purpose hold-down mat
- Designed for laser and CNC engraving
- Non-clamp set-up method
- Re-usable and longlive
How do I attach the PowerMat® to the engraving table?
The PowerMat's® adhesive coating on both sides connects the underside to the engraving table, eliminating the need for additional clamping.
How is the PowerMat® cleaned?
Over a longer period of time, dust, traces of gunpowder and chips can settle on the surface of the adhesive mat. The impurities impair the adhesive effect due to the smaller contact surface. All PowerMat® adhesive mats can be cleaned under running water with a soft sponge. The addition of washing-up liquid also cleans the surface of oil traces. With a squeegee, the drying process can be accelerated by pulling off the water droplets. The use of cloths and paper should be avoided, as this can cause fibres to adhere to the adhesive surface.
How is the PowerMat® cut?
All PowerMat® adhesive mats can be cut with hand lever scissors. If necessary, protect the adhesive surface under the hold-down device with a piece of engraving material.
Which operator of a laser engraving system does not know the problem of stretching wavy self-adhesive engraving material flat in order to avoid focus problems during marking. With the new PowerMat-Pro® adhesive layer, the adhesion for self-adhesive material has now been specially improved with a silicone backing paper (3M adhesive backing).
Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com
Warning Notes:
Over a longer period of time, dust, traces of gunpowder and chips can stain the adhesive mat. Dirt reduces the adhesive effect due to a smaller contact surface. Cloths and paper leave behind fibers that can interfere with the function of the adhesive surface.
Safety Instructions:
Clean the adhesive mat under running water with a soft sponge. Use dish soap to thoroughly remove traces of oil. No abrasive detergents or tools to avoid damage to the surface.
Intended Use:
The product is intended for attaching materials/objects to engraving and laser system tables.
Prices are only available upon verified registration on this website
Product number:
902003001
Customers also bought
Product number:
619990127
Engraving Table Tape, 12,7mm x 100m
- Hold engraving plates to the bed
- 50-60 engravings without changing the tape
- Size 12,7 mm x 66 m
Product number:
6150755
Aluminium Oxide 96ml
- Blackening solution for aluminium alloys
- Bottle can contents 96 ml
Product number:
61507102
Marking Stick, black #507102
- Highlighter, fill-in paint
- For small engravings
- Paint stays flexible
- Mark temperature resistance 260°C
- Color black
Product number:
619990150
LaserEdge f. paint fill applications
- Laser mask for paint fill applications
- Sharp definition for painting
- Non-residue
- Weeds easily after lasering
- Size 150 mm x 66 m
Product number:
4045033
Pet Tag - Bone, Aluminium anodised blue
- Pet tag
- Bone-shape
- Blue anodized aluminum
- 38 x 26 mm
- Made for laser and rotary engraving
Product number:
4045030
Pet Tag - Bone, Aluminium anodised red
- Pet tag
- Bone-shape
- Red anodized aluminum
- 38 x 26 mm
- Made for laser and rotary engraving