Standard Cutter 6,35x165mm
- Solid Carbide
- Standard Cutter
- 6,35 x 165 mm
- 9 available tip sizes
Shank Diameter 6,35 mm
Length: 165 mm
Available tip sizes in mm: 0,25/0,32/0,5/0,75/1,0/1,25/1,5/2,0/3,0
Suitable for: ACR (acrylic) / FLX (soft plastics - flexible engraving stock) / BAL (soft metals - brass, aluminum) / SSS (harder metals - steel, stainless steel)
Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com
Warning Notes:
Attention: Sharp edges! Risk of injury in case of direct contact. Particulate matter can be harmful to health when inhaled.
Safety Instructions:
Use cutters only with suitable machines and settings. Check regularly for wear or tear and replace if there is visible damage. Use a local exhaust system in the area of dust generation.
Intended Use:
The product is designed for precise engraving and cutting of engraving materials.
Prices are only available upon verified registration on this website
Product number:
6255112025
Customers also bought
Product number:
55351420
Decorative selfadh. Plate 35x14mm #508
- Decorative selfadh. Plate
- lightly brushed Surface
- 35 x 14 mm
- silver brushed/brass
Product number:
60907226
Clutch w/Plastic Base (Pair) #907-226
- Clutches w/ plastic base
- Pair
- Not self-adhesive
- For fastening name badges
- Base diameter 11 mm
Product number:
62581052
1 Flute Router-Mill 4,36 x 165mm / 2,0mm
- 1 Flute Router-Mill
- For cutting plastics
- Spiral O-flute
- Tip width 2,0 mm
- 4,36 x 165 mm
Product number:
62581436
Knob 4,36mm
- Cutter Knob for Cutter
- Shank Diameter 4,36 mm
- Suitable for Roland
Product number:
932010
Lasercork 1,0 mm (fine-grained) 610 x 305 mm
- Fine grained cork granulate for precise laser engraving
- Smooth and homogeneous surface
- Sustainable, environmentally friendly raw material
- Ideal for promotional gifts and personalised items
Last seen products
Product number:
33404016H
Cast Acrylic Reverse
- Cast Acrylic
- 2-Ply engraving material
- Laminated cap is scratchproofed
- Weather-resistant
- Reverse engraving
Product number:
6258106025
HSS-Cutter 4,36x165mm
HSS-Cutter 4,36x165mm
0,25mm
- High Speed Steel Engraving Cutters
- 4,36 x 165 mm
- 9 available tip sizes
Product number:
46EF1306
Hardwood Veneer Cherry 610x305x6mm
- Veneer is not sealed or lacquered
- Superior strength & stiffness
- Superior dimensional stability
- Durable, 5-Ply layer construction
- Free of open knots and natural voids
- Hardwood Veneer Cherry
Product number:
5078111C
Metal Trophy "Subli" 280mm #5078111C
- Silver front panel is made for sublimation printing
- Size 280 mm
Product number:
72TOWEL3
Cotton towel white 50x100mm
- Towel out of 100% Cotton
- Printable white polyester border
- Size 50 x 100 cm
- white