Configurable
1 Flute Router-Mill 3,00 x 38mm / 2,0mm
- 1 Flute Router-Mill
- For cutting aluminum & soft metals
- Spiral O-flute
- Polished flute
- Tip width 2,0 mm
- 3,0 x 38 mm
- Length of cut 5 mm
1 Flute Router-Milll. Right hand cut, right hand helix, spiral O-flute. For rapid cuts in aluminum while maintaining a superior finish. Polished flute helps prevent chip welding.
Shank Diameter 3,0 mm
Length: 38 mm
Cutting edge diameter (tip width): 2,0 mm
Length of cut: 5,0 mm
Suitable for: BAL (soft metals - brass, aluminum)
Shank Diameter 3,0 mm
Length: 38 mm
Cutting edge diameter (tip width): 2,0 mm
Length of cut: 5,0 mm
Suitable for: BAL (soft metals - brass, aluminum)
Customers also bought:
PLY 2
End Mill - Two Flutes 3,0x37mm / 3,0mm - 2 Flutes End Mill
- Spiral O-flute
- Tip width 3,0 mm
- 3,00 x 37 mm
Item No.: 62581033
Configurable
Aluminium G (matt) - Double-sided anodised aluminium
- Matte finish
- Alloy ALMG3
- Premium quality
Configurable
LaserPlus - Integrated hardcoat
- Advanced protection for exterior applications
- UV stable and outdoor weatherable
Laser Rubber "Eco", DIN A4, Green - Manufactured from organic components
- Lower particulate emission
- Superior engraving quality
- Hardness: 60 Sh
Item No.: 90600
Configurable
Acrylic Spectrum LED - Cast acrylic
- Matte surface
- UV-stable and outdoor weatherable
- Consistent bold colour when illuminated
Configurable
Hold-down Mat PowerMat®-Pro - 2-sided multi-purpose hold-down mat
- Designed for laser and CNC engraving
- Non-clamp set-up method
- Re-usable and longlive
Tissue Tape 244mm x 100m - Low tack, paper mask
- Made for laser engraving, crystal etchings, and letter transferring
- Protects foil from edge burn while laser engraving
- Size 244 mm x 100 m
Item No.: 612441
LaserEdge f. paint fill applications - Laser mask for paint fill applications
- Sharp definition for painting
- Non-residue
- Weeds easily after lasering
Item No.: 619990150
Laser-Tape / br. gold / 150 mm x 7,5 m - Thin, polyester mylar tape for laser engraving
- Adds metallic luster and color to any laser engraving product
- Permanent adhesive
- Bonds well to wood
Item No.: 611564
Laser Rubber "Standard 50W", DIN A4, Grey - Suitable for any type of stamp
- Alcohol and water based inks resistance
- Outstanding engraving and impression quality
- Hardness: 53 Sh
Item No.: 90500
Vacuum Table A3 - 450x300mm - Vacuum table A3 - 450 x 300 mm
- Clamping time reductions over 70%
Item No.: 704530
Diamant Gravers 3,17x28,5mm 120° - Diamond Graver
- Non-rotating tool
- Diamond angle: 120°
- Surface marking only
Item No.: 6258140
1 Flute Router-Mill 6,00 x 50mm / 6,0mm - 1 Flute Router-Mill
- For cutting aluminum & soft metals
- Spiral O-flute
- Polished flute
Item No.: 62R1A060616
1 Flute Router-Mill 4,36 x 165mm / 2,0mm - 1 Flute Router-Mill
- For cutting plastics
- Spiral O-flute
- Tip width 2,0 mm
Item No.: 62581052
Bevel Cutter 45° 3,17x115mm - Bevel Cutter
- Cutting angle 45°
- Suitable for beveling machines
- 3,17 x 115 mm
Item No.: 62541045
End Mill - Two Flutes 3,0x37mm / 2,0mm - 2 Flutes End Mill
- Spiral O-flute
- Tip width 2,0 mm
- 3,00 x 37 mm
Item No.: 62581032
Configurable
Standard Cutter 3,00x50mm - Solid Carbide
- Standard Cutter
- 3,00 x 50 mm
- 9 available tip sizes
Aluminium Oxide 96ml - Blackening solution for aluminium alloys
- Bottle can contents 96 ml
Item No.: 6150755
CerMark LMC 6044p Aerosol Spray, 340g - Creating black marks on glas and cermic substrates
- Aerosol
- Spray can contents 340 g
Item No.: 6150604434
Marking Stick, red #507103 - Highlighter, fill-in paint
- For small engravings
- Paint stays flexible
- Mark temperature resistance 260°C
Item No.: 61507103
Florenz, Plate 1-6mm, Stainless Steel (4pcs) - 2-part wall spacer
- Interior and exterior use
- Stainless steel (untreated)
- Incl. mounting set
Item No.: 44650
Magnet Badge MAG 02 #987-002 - For self-manufacture of name badges
- High magnetic power
- Base is made of plastic
- 45 x 12 mm
Item No.: 60987002
Magnet Badge MAG 01 #987-001 - For self-manufacture of name badges
- Very high magnetic power
- Base is made of plastic
- 45 x 13 mm
Item No.: 60987001
Insert Plate 27x12,5mm r=2mm self-adhesive - Type "Siemens"
- Thickness 0,8 mm
- silver glossy / black
- self-adhesive
Item No.: 4527125
Configurable
Aluminium G (Colours, matt) - Double-sided anodised aluminium
- Matte finish
- Alloy ALMG3
- Premium quality
Configurable
LaserMetall - Color coated aluminum
- Made for laser engraving
- Allows to create silver or gold marks
- Ideal for nameplates
Configurable
AluCast - Color coated aluminum
- Made for laser engraving
- Allows to create black or white marks
Configurable
AluSign - Laser markable aluminium
- Ideal for name plate and scale applications
- Returns black characters when lasered
Configurable
DuraBlack - CO2 laser markable aluminium
- Durable marking
- Meets several specifications
- Resistant to sunlight (UV-radiation), high-temperatures, saltspray and chemical exposure
Configurable
AlumaMark - Returns black characters when lasered
- No oxidation or paint fill needed
- Satin and matte finish
- Low power settings
Configurable