Multipal
- 3-Ply material
- High-pressure laminated Phenolic Resin
- Resistant to chemicals and solvents
- Non-flammable
- Double-sided engravable
Multipal is a 3-layer, double-sided engravable laminate made of synthetic resin for milling engraving. It is flame retardant and resistant to ageing, making it suitable for signage in the industrial sector.
Product Information:
Multipal is a layered engraving material for high contrast lettering, signs and technical identification.
Application and Processing:
Engraving depth, feed rate and tool selection should be adjusted so that the surface layer is cleanly removed without machining unnecessarily deeply into the substrate. For small lettering and detailed designs, a sharp tool, a flat material surface and consistent machining are particularly important. Before processing larger quantities, we recommend testing the parameters using the actual colour combination and material thickness.
Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com
Warning Notes:
Caution! Flammable material. Harmful fumes when heated! Risk of breakage in case of improper handling.
Safety Instructions:
Keep away from heat sources. Ensure sufficient room ventilation during storage and use. Use a local exhaust system in the area of dust and smoke.
Intended Use:
The product is intended for the production of signs.
Colours
glossy
Capabilities
- Laser
- Laser Vector Cuts
- Rotating Carbide
- Hot Stamps
- Screen Prints
- Drills
- Bonds
- Saws
- Shears
- Punch
Properties
| Finish: | Gloss |
|---|---|
| Cutting Depth: | 0,3mm |
| Thicknesses: | 1,0/1,4/2,0/3,0 mm |
| Standard Format: | 600 x 600 mm |
| Temp. max: | 80 °C |
| Engraving material: | Phenolic Resin HPL |
- UV Stable
- Flexible
- Break-Proof
Usage
- Interior
- Exterior
