LaserUltra
- Thin laser engraving material
- Microthin surface layer
- Available in 0,5 mm thickness
LaserUltra is a flexible, laser-capable engraving material. The material thickness of only 0.5 mm can be easily cut with a laser. Its micro-thin surface allows very fine engravings without shadowing. Ideal for control cabinet lettering and cup base signs. Available in 7 colours.
Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com
Warning Notes:
Caution! Flammable material. Health-hazardous fumes when heated! Risk of breakage with improper handling.
Safety Instructions:
Keep away from heat sources. Ensure adequate room ventilation during storage and use. Use a local exhaust system in areas with dust and smoke development.
Intended Use:
The product is intended for the production of signs.
Colours
matte
glossy
Capabilities
- Laser
- Laser Vector Cuts
- Rotating Carbide
- Hot Stamps
- Screen Prints
- Drills
- Bonds
- Saws
- Shears
- Punch
Properties
| Finish: | Matte/Gloss |
|---|---|
| Cutting Depth: | 0,1 mm |
| Thicknesses: | 0,5 mm |
| Standard Format: | 610 x 610 mm |
| Temp. max: | 80 °C |
| Engraving material: | Impact Acrylicl |
- UV Stable
- Flexible
- Break-Proof
Usage
- Interior
- Exterior
Customers also bought
markSolid 114 Aerosol Spray, 300ml
- Creating black marks on a variety of metal
Aluminium Oxide 96ml
- Blackening solution for aluminium alloys
- Bottle can contents 96 ml
Tissue Tape 244mm x 100m
- Low tack, paper mask
- Made for laser engraving, crystal etchings, and letter transferring
- Protects foil from edge burn while laser engraving
- Size 244 mm x 100 m
Spectrumark Aerosol Spray, 340g
- Spray can contents 340 g
- High-contrast marking on metal
- Creating black marks
CerMark LMC 6044p Aerosol Spray, 340g
- Creating black marks on glas and cermic substrates
- Aerosol
- Spray can contents 340 g