LaserUltra
- Thin laser engraving material
- Microthin surface layer
- Available in 0,5 mm thickness
LaserUltra is a flexible, laser-capable engraving material. The material thickness of only 0.5 mm can be easily cut with a laser. Its micro-thin surface allows very fine engravings without shadowing. Ideal for control cabinet lettering and cup base signs. Available in 7 colours.
Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com
Warning Notes:
Caution! Flammable material. Health-hazardous fumes when heated! Risk of breakage with improper handling.
Safety Instructions:
Keep away from heat sources. Ensure adequate room ventilation during storage and use. Use a local exhaust system in areas with dust and smoke development.
Intended Use:
The product is intended for the production of signs.
Colours
matte
glossy
Capabilities
- Laser
- Laser Vector Cuts
- Rotating Carbide
- Hot Stamps
- Screen Prints
- Drills
- Bonds
- Saws
- Shears
- Punch
Properties
| Finish: | Matte/Gloss |
|---|---|
| Cutting Depth: | 0,1 mm |
| Thicknesses: | 0,5 mm |
| Standard Format: | 610 x 610 mm |
| Temp. max: | 80 °C |
| Engraving material: | Impact Acrylicl |
- UV Stable
- Flexible
- Break-Proof
Usage
- Interior
- Exterior
Customers also bought
Magnet Badge MAG 02 #987-002
- For self-manufacture of name badges
- High magnetic power
- Base is made of plastic
- 45 x 12 mm
- Zinc-plated steel plate w/ foam pad
- Low weight
Magnet Badge MAG 03 #987-003
- Two round rare earth magnets
- High magnetic power
- Base is made of plastic
- 32 x 12 mm
- Zinc-plated steel plate w/ foam pad
Laser Rubber "Standard 50W", DIN A4, Grey
- Suitable for any type of stamp
- Alcohol and water based inks resistance
- Outstanding engraving and impression quality
- Hardness: 53 Sh
- CO2 Laser 50 W
Adhesive Transfer Tape 14mmx50m
- High initial adhesion (tack)
- High shear strength
- Resistance to ageing, weathering and UV-radiation
- Resistance to the influence of chemicals and solvents
- 14 mm x 50 m
markSolid 114 Aerosol Spray, 300ml
- Creating black marks on a variety of metal
Spectrumark Aerosol Spray, 340g
- Spray can contents 340 g
- High-contrast marking on metal
- Creating black marks