LaserSatin
- Laser engraving and cutting
- Rotary engravable
- Slightly brusged, non-glare finish
- Microthin surface layer
- High-value metal optic
Its surface has a slightly brushed structure, similar to the engraving material PLY 1. The UV-resistant, micro-thin coating allows very fine engravings without shadowing and is therefore also ideally suited for less powerful laser engraving machines. The surface finish is particularly effective in the colours brass and platinum (LZS-999-016 / LZ-998-016). Here, the light refracts from light to dark, depending on the viewing angle. The high-gloss, polished surface gives these colours a precious metallic character.
Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com
Warning Notes:
Caution! Flammable material. Health-hazardous fumes when heated! Risk of breakage with improper handling.
Safety Instructions:
Keep away from heat sources. Ensure adequate room ventilation during storage and use. Use a local exhaust system in areas with dust and smoke development.
Intended Use:
The product is intended for the production of signs.
Colours
satined
high-glossy, satined
Capabilities
- Laser
- Laser Vector Cuts
- Rotating Carbide
- Hot Stamps
- Screen Prints
- Drills
- Bonds
- Saws
- Shears
- Punch
Properties
| Finish: | Slightly Brushed |
|---|---|
| Cutting Depth: | 0,1 mm |
| Thicknesses: | 1,6 mm |
| Standard Format: | 610 x 610 mm |
| Temp. max: | 80 °C |
| Engraving material: | Impact Acrylicl |
- UV Stable (except Brass)
- Flexible
- Break-Proof
Usage
- Interior
- Exterior (except messing)
Customers also bought
Laser Rubber "Standard 50W", DIN A4, Grey
- Suitable for any type of stamp
- Alcohol and water based inks resistance
- Outstanding engraving and impression quality
- Hardness: 53 Sh
- CO2 Laser 50 W
Laser Rubber "No Smell", DIN A4, Grey
- Free of smell
- Alcohol and water based inks resistance
- Outstanding engraving and impression quality
- Hardness: 60 Sh
Plywood Poplar 600x300x3mm
- Low smoke emission
- Suitable for laser engraving and painting
- Surfaces are untreated
- Plywood made of Poplar
markSolid 114 Aerosol Spray, 300ml
- Creating black marks on a variety of metal
Tissue Tape 244mm x 100m
- Low tack, paper mask
- Made for laser engraving, crystal etchings, and letter transferring
- Protects foil from edge burn while laser engraving
- Size 244 mm x 100 m
Magnet Badge MAG 02 #987-002
- For self-manufacture of name badges
- High magnetic power
- Base is made of plastic
- 45 x 12 mm
- Zinc-plated steel plate w/ foam pad
- Low weight