LaserReverse
- Laserable
- Rotary Engravable
- UV stable and outdoor weatherable
- Microthin surface layer
- Non-glare matte finish
- Made for reverse engraving
- 1,6 mm / 3,0 mm thicknesses
LaserReverse is designed for laser engraving. The inscription is in mirror lettering on the back. Its micro-thin coating on the back allows very fine engravings and is therefore also suitable for less powerful laser engraving machines. We recommend that the lettering be coloured with "System3 Acrylic Paints" after engraving. LaserReverse is weather-resistant and suitable for outdoor use. The surface is matt and low-reflection.
Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com
Warning Notes:
Caution! Flammable material. Health-hazardous fumes when heated! Risk of breakage with improper handling.
Safety Instructions:
Keep away from heat sources. Ensure adequate room ventilation during storage and use. Use a local exhaust system in areas with dust and smoke development.
Intended Use:
The product is intended for the production of signs.
Colours
matte
glossy
Capabilities
- Laser
- Laser Vector Cuts
- Rotating Carbide
- Hot Stamps
- Screen Prints
- Drills
- Bonds
- Saws
- Shears
- Punch
Properties
| Finish: | Matte |
|---|---|
| Cutting Depth: | 0,2mm |
| Thicknesses: | 1,6 / 3,0 mm |
| Standard Format: | 610 x 610 mm |
| Temp. max: | 80 °C |
| Engraving material: | Impact Acrylicl |
- UV Stable
- Flexible
- Break-Proof
Usage
- Interior
- Exterior
Customers also bought
Wall Spacer 13, Aluminium anodised silver (4pcs)
- 2-part wall spacer set
- Interior and exterior use
- Aluminium, anodised silver matte
- Panel thickness 2-7 mm
- Wall space 13 mm
- Diameter 12 mm
- Headform flat
Bell Button chromed
- Suitable for installation in door stations, door plates or industrial applications
- Max. plate thickness 6 mm
- Hole in the plate 16 mm
- IP 54 ( when installed in vertical position)
- Key button chrome-plated brass
- Key sleeve chrome-plated brass
Bell Button Stainless Steel
- Type PROTACT 250 VA
- Suitable for installation in door stations, door plates or industrial applications
- Max. plate thickness 6 mm
- Hole in the plate 16 mm
- IP 54 ( when installed in vertical position)
- Key button stainless steel
- Key sleeve stainless steel
Ornamental Plate Type 386 #507
- For Signage of paintings, saddles and honorary plates
- Signs out of brass
- 90x18 mm
- brass brushed
Pet Tag Collar, satin brass, 73x23 mm
- Pet Tag Collar
- Satin brass covered with protective varnish
- 73 x 23 mm