LaserFoil
- Flexible, thin laser engraving material
- Microthin surface layer
- Designed for the laser engrave
- Self-adhesive
- Available in 0,2 mm thickness
LaserFolie is specially developed for laser engraving and laser cutting and comes with a self-adhesive backing, allowing for easy and fast application. With a material thickness of 0.2 mm, it is ideal for use on curved and flexible surfaces. The ultra-thin surface ensures fine, high-contrast engravings without shadowing and enables clean cutting edges, even for intricate contours. Thanks to its flexibility, LaserFolie is perfectly suited for applications on curved surfaces as well as for retroactive labeling. LaserFolie is particularly suitable for marking, labeling, control cabinet identification, and industrial applications where a flexible and precise solution is required.
Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com
Warning Notes:
Caution! Flammable material. Health-hazardous fumes when heated! Risk of breakage with improper handling.
Safety Instructions:
Keep away from heat sources. Ensure adequate room ventilation during storage and use. Use a local exhaust system in areas with dust and smoke development.
Intended Use:
The product is intended for the production of signs.
Colours
LaserFoil - Interior - matte
LaserFoil - Interior - glossy
LaserFoilPlus - Exterior - matte
LaserFoilPlus - Exterior - glossy
Capabilities
- Laser
- Laser Vector Cuts
- Rotating Carbide
- Hot Stamps
- Screen Prints
- Drills
- Bonds
- Saws
- Shears
- Punch
Properties
| Finish: | Matte/Gloss |
|---|---|
| Cutting Depth: | 0,05 mm |
| Thicknesses: | 0,2 mm |
| Standard Format: | 610 x 305 mm |
| Temp. max: | 80 °C |
| Engraving material: | Impact Acrylic |
- UV Stable
- Flexible
- Break-Proof
Usage
- Interior
- Exterior
Customers also bought
CerMark LMM6000 Spray Can, 340g
- LMM6000 Spray Can
- Black Laser Marking
- For Many Metals
- Contents 340 g
Bell Button Stainless Steel
- Type PROTACT 250 VA
- Suitable for installation in door stations, door plates or industrial applications
- Max. plate thickness 6 mm
- Hole in the plate 16 mm
- IP 54 ( when installed in vertical position)
- Key button stainless steel
- Key sleeve stainless steel
Suction Cup 40mm w/Screw M4x10 #4010
- Suction cup for long-term holding
- Apply to clean surfaces
- Cup diamenter 40 mm
- Screw M4 x 10 mm
Adhesive Transfer Tape 48 mm x 50m
- High initial adhesion (tack)
- High shear strength
- Resistance to ageing, weathering and UV-radiation
- Resistance to the influence of chemicals and solvents
- 48 mm x 50 m
CerMark ULTRA Spray Can, 56g
- CerMark ULTRA Spray Can
- Black Laser Marking
- Stone, Brick and Slate Marking
- Tile and Glass Marking
- For Many Metals
- Easy Parameter Setup
- No Spray Nozzle Clogging
- Contents 56 g