LaserBasic
- Laser engraving and cutting
- Rotary engravable
- Single colored impact acrylic
- Braille-engravable
- UV-stable and outdoor weatherable
LaserBasic is a single-color, economical engraving material for laser engraving. Ideal for using advertising letters and making stencils. UV-stable and weather-resistant for outdoor use. Available in 6 colours.
Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com
Warning Notes:
Caution! Flammable material. Health-hazardous fumes when heated! Risk of breakage with improper handling.
Safety Instructions:
Keep away from heat sources. Ensure adequate room ventilation during storage and use. Use a local exhaust system in areas with dust and smoke development.
Intended Use:
The product is intended for the production of signs.
Prices are only available upon verified registration on this website
Colours
glossy
Capabilities
- Laser
- Laser Vector Cuts
- Rotating Carbide
- Hot Stamps
- Screen Prints
- Drills
- Bonds
- Saws
- Shears
- Punch
Properties
| Finish: | Gloss |
|---|---|
| Cutting Depth: | -- |
| Thicknesses: | 1,6 mm |
| Standard Format: | 610 x 610 mm |
| Temp. max: | 80 °C |
| Engraving material: | Impact Acrylicl |
- UV Stable
- Flexible
- Break-Proof
Usage
- Interior
- Exterior
Customers also bought
Product number:
46SH1630
Plywood Poplar 600x300x3mm
- Low smoke emission
- Suitable for laser engraving and painting
- Surfaces are untreated
- Plywood made of Poplar
Product number:
6150810
VARGOL 0,5l
- Lubricant for engraving and cutting material
- Suitable for all Varga saws
- 0,5 litre
Product number:
90400
Laser Rubber "No Smell", DIN A4, Grey
- Free of smell
- Alcohol and water based inks resistance
- Outstanding engraving and impression quality
- Hardness: 60 Sh
Product number:
46SH1660
Plywood Poplar 600x300x6mm
- Low smoke emission
- Suitable for laser engraving and painting
- Surfaces are untreated
- Plywood made of Poplar
Last seen products
Product number:
43LZR904016D
LaserReverse
- Laserable
- Rotary Engravable
- UV stable and outdoor weatherable
- Microthin surface layer
- Non-glare matte finish
- Made for reverse engraving
- 1,6 mm / 3,0 mm thicknesses