LaserAcryl 3
- Laser engraving and cutting
- Rotary engravable
- UV stable
- Microthin surface layer for detailed engraving
LaserAcryl 3 is specially developed for laser engraving and features a UV-resistant, ultra-thin coating. This allows for fine, high-contrast engravings without shadowing and ensures clean, precise edges. With a material thickness of 3.0 mm, LaserAcryl 3 is ideal for demanding environments where durability and stability are required. The optimized material composition delivers excellent results for both raster and vector engraving, as well as clean cutting edges during laser cutting.
Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com
Warning Notes:
Caution! Flammable material. Health-hazardous fumes when heated! Risk of breakage with improper handling.
Safety Instructions:
Keep away from heat sources. Ensure adequate room ventilation during storage and use. Use a local exhaust system in areas with dust and smoke development.
Intended Use:
The product is intended for the production of signs.
Colours
matte
Capabilities
- Laser
- Laser Vector Cuts
- Rotating Carbide
- Hot Stamps
- Screen Prints
- Drills
- Bonds
- Saws
- Shears
- Punch
Properties
| Finish: | Matte |
|---|---|
| Cutting Depth: | 0,1 mm |
| Thicknesses: | 3,0 mm |
| Standard Format: | 610 x 610 mm |
| Temp. max: | 80 °C |
| Engraving material: | Impact Acrylic |
- UV Stable
- Flexible
- Break-Proof
Usage
- Interior
- Exterior
Customers also bought
CerMark LMM6000 Spray Can, 340g
- LMM6000 Spray Can
- Black Laser Marking
- For Many Metals
- Contents 340 g
Laser Rubber "No Smell", DIN A4, Grey
- Free of smell
- Alcohol and water based inks resistance
- Outstanding engraving and impression quality
- Hardness: 60 Sh
Tissue Tape 244mm x 100m
- Low tack, paper mask
- Made for laser engraving, crystal etchings, and letter transferring
- Protects foil from edge burn while laser engraving
- Size 244 mm x 100 m
Lacquer black 500g -UN1263-
- Nitrolaque black
- For colouring rotary engraving on metal and steel
- Fast drying
- 500 g
Plywood Poplar 600x300x3mm
- Low smoke emission
- Suitable for laser engraving and painting
- Surfaces are untreated
- Plywood made of Poplar
Magnet Badge MAG 01 #987-001
- For self-manufacture of name badges
- Very high magnetic power
- Base is made of plastic
- 45 x 13 mm
- Zinc-plated steel plate w/ foam pad