LaserAcryl 3
- Laser engraving and cutting
- Rotary engravable
- UV stable
- Microthin surface layer for detailed engraving
LaserAcryl 3 is specially developed for laser engraving and features a UV-resistant, ultra-thin coating. This allows for fine, high-contrast engravings without shadowing and ensures clean, precise edges. With a material thickness of 3.0 mm, LaserAcryl 3 is ideal for demanding environments where durability and stability are required. The optimized material composition delivers excellent results for both raster and vector engraving, as well as clean cutting edges during laser cutting.
Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com
Warning Notes:
Caution! Flammable material. Health-hazardous fumes when heated! Risk of breakage with improper handling.
Safety Instructions:
Keep away from heat sources. Ensure adequate room ventilation during storage and use. Use a local exhaust system in areas with dust and smoke development.
Intended Use:
The product is intended for the production of signs.
Colours
matte
Capabilities
- Laser
- Laser Vector Cuts
- Rotating Carbide
- Hot Stamps
- Screen Prints
- Drills
- Bonds
- Saws
- Shears
- Punch
Properties
| Finish: | Matte |
|---|---|
| Cutting Depth: | 0,1 mm |
| Thicknesses: | 3,0 mm |
| Standard Format: | 610 x 610 mm |
| Temp. max: | 80 °C |
| Engraving material: | Impact Acrylic |
- UV Stable
- Flexible
- Break-Proof
Usage
- Interior
- Exterior
Customers also bought
Wall Spacer 20, Aluminium anodised silver (4pcs)
- 2-part wall spacer set
- Interior and exterior use
- Aluminium, anodised silver matte
- Panel thickness 2-12 mm
- Wall space 20 mm
- Diameter 12 mm
- Headform flat
Laser Rubber "Standard 50W", DIN A4, Grey
- Suitable for any type of stamp
- Alcohol and water based inks resistance
- Outstanding engraving and impression quality
- Hardness: 53 Sh
- CO2 Laser 50 W
Tissue Tape 244mm x 100m
- Low tack, paper mask
- Made for laser engraving, crystal etchings, and letter transferring
- Protects foil from edge burn while laser engraving
- Size 244 mm x 100 m
Veneer Wood Birch, 3 mm, 600 x 300 mm, oiled
- High-quality homogeneous HDF core
- Easy processing with the laser
- Little smoke residue formation
- Little cleaning effort
Veneer Wood Walnut, 3 mm, 600 x 300 mm, oiled
- High-quality homogeneous HDF core
- Easy processing with the laser
- Little smoke residue formation
- Little cleaning effort
Plywood Poplar 600x300x3mm
- Low smoke emission
- Suitable for laser engraving and painting
- Surfaces are untreated
- Plywood made of Poplar