LaserAcryl 1

Laser engraving and cutting
Rotary engravable
UV stable
Microthin surface layer
Matte, brushed or glossy finish
Ideal for industrial use
Wide range of colours

LaserAcryl 1 is a proven engraving material for fine laser engraving and precise vector cutting. The UV-resistant, ultra-thin surface layer enables detailed engravings with clean contours and reduces shadowing.

Product Information:
LaserAcryl 1 is a two-layer engraving material with a particularly thin surface layer. This allows fine lettering, detailed logos and high-contrast markings to be produced with precision. The material is suitable for signs, labelling and technical identification. The material is suitable for both indoor and outdoor use and is available in numerous colour combinations.

Application and Processing:
Laser power, speed, frequency and focus should be adjusted so that the surface layer is cleanly removed without unnecessarily engraving too deeply into the substrate. For small lettering and detailed designs, consistent focus and a flat material surface are particularly important. Before processing larger quantities, we recommend testing the parameters using the actual colour combination and material thickness.

More about Knowledge & Processing ›

Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com

Warning Notes:
Caution! Flammable material. Health-hazardous fumes when heated! Risk of breakage with improper handling.

Safety Instructions:
Keep away from heat sources. Ensure adequate room ventilation during storage and use. Use a local exhaust system in areas with dust and smoke development.

Intended Use:
The product is intended for the production of signs.

Prices are only available upon verified registration on this website