LaserTexture
- Textured Surface
- UV stable and outdoor weatherable
- Resistant to fingerprints
- Ideal for industrial use
LaserTexture is a weather- and UV-resistant material for laser engraving, specially developed for demanding applications. Its durable, textured surface is resistant to fingerprints and ensures a consistently clean and high-quality appearance. Thanks to its robust properties, LaserTexture is ideal for use in heavily used and high-traffic environments. The material delivers precise, high-contrast engraving results with clear contours and is suitable for both raster and vector engraving. LaserTexture is the ideal choice for industrial signage, nameplates, and applications in both indoor and outdoor environments where durability, resistance, and a clean surface are essential.
Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com
Warning Notes:
Caution! Flammable material. Health-hazardous fumes when heated! Risk of breakage with improper handling.
Safety Instructions:
Keep away from heat sources. Ensure adequate room ventilation during storage and use. Use a local exhaust system in areas with dust and smoke development.
Intended Use:
The product is intended for the production of signs.
Colours
textured
Capabilities
- Laser
- Laser Vector Cuts
- Rotating Carbide
- Hot Stamps
- Screen Prints
- Drills
- Bonds
- Saws
- Shears
- Punch
Properties
| Finish: | Textured |
|---|---|
| Cutting Depth: | 0,3 mm |
| Thicknesses: | 1,6/3,2 mm |
| Standard Format: | 610 x 610 mm |
| Temp. max: | 80 °C |
| Engraving material: | Impact Acrylic |
- UV Stable
- Flexible
- Break-Proof
Usage
- Interior
- Exterior
Customers also bought
Magnet Badge MAG 02 #987-002
- For self-manufacture of name badges
- High magnetic power
- Base is made of plastic
- 45 x 12 mm
- Zinc-plated steel plate w/ foam pad
- Low weight
Magnet Badge MAG 03 #987-003
- Two round rare earth magnets
- High magnetic power
- Base is made of plastic
- 32 x 12 mm
- Zinc-plated steel plate w/ foam pad
Laser Rubber "No Smell", DIN A4, Grey
- Free of smell
- Alcohol and water based inks resistance
- Outstanding engraving and impression quality
- Hardness: 60 Sh
Engraving Table Tape, 12,7mm x 100m
- Hold engraving plates to the bed
- 50-60 engravings without changing the tape
- Size 12,7 mm x 66 m
Plywood Poplar 600x300x3mm
- Low smoke emission
- Suitable for laser engraving and painting
- Surfaces are untreated
- Plywood made of Poplar
Decorative selfadh. Plate 35x14mm Stainless Steel
- Decorative selfadh. Plate
- lightly brushed Surface
- 35 x 14 mm
- stainless steel