markSolid 114 Aerosol Spray, 300ml
- Creating black marks on a variety of metal
Marking color: black
Spray can contents: 300 ml
Manufacturer:
Pigmentum GmbH, Schillerstrasse 35, 90547 Stein, Germany
E-mail: office@markSolid.de
Warning Notes:
Extremely flammable aerosol. Container is under pressure: Can burst when heated. Causes severe eye irritation. May cause drowsiness and lightheadedness. Can probably cause cancer.
Safety Instructions:
Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking. Do not spray against open flame or other ignition source. Do not puncture or burn, even after use. Avoid inhaling dust/smoke/gas/mist/steam/aerosol. Use only outdoors or in well-ventilated rooms. Wear protective gloves / protective clothing / eye protection / face protection.
Intended Use:
The product is intended for decorative coating with a laser system.
Customers also bought
Aluminium Oxide 96ml
- Blackening solution for aluminium alloys
- Bottle can contents 96 ml
CerMark LMC 6044p Aerosol Spray, 340g
- Creating black marks on glas and cermic substrates
- Aerosol
- Spray can contents 340 g
CerMark LMM 6000 Aerosol Spray, 340g
- LMM 6000 Aerosol
- Laser marking inks
- Creating black marks on a variety of metals
- Spray Can contents 340 g
CerMark ULTRA Aerosol Spray, 56g
- Spray can contents 56 g
- Stone / brick / slate marking
- Tile / glass marking
- No hard setting
- Non-clogging spray nozzle
- Metal marking
- Creating black marks
- Full laser speed
Tissue Tape 244mm x 100m
- Low tack, paper mask
- Made for laser engraving, crystal etchings, and letter transferring
- Protects foil from edge burn while laser engraving
- Size 244 mm x 100 m
Last seen products
AlumaMark
Sheet
5260
305 mm x 254 mm
0.13 mm
satin silver, adhesive
- Returns black characters when lasered
- No oxidation or paint fill needed
- Satin and matte finish
- Low power settings
Melamine
- 3-Ply material
- High-pressure laminated Phenolic Resin
- Resistant to chemicals and solvents
- Non-flammable
- Double-sided engravable
Aluminium G (matt)
Sheet
601-005
0.50 mm
500 mm x 500 mm
natural
- Double-sided anodised aluminium
- Matte finish
- Alloy ALMG3
- Premium quality
- Weather-resistant
LaserUltra
- Thin laser engraving material
- Microthin surface layer
- Available in 0,5 mm thickness
Goldcoast
- Laser engraving and cutting
- Rotary engravable
- UV stable
- Most elegant engraving product
- Recreates the look of colored brass
Pet Tag - Cat Head, bright Brass
- Pet tag
- Cat head shape
- Bright brass
- 35 x 33 mm
- Made for rotary and diamond engraving