Brass MS58
- Highly polished finshed
- Alloy MS58
- Unprotected surface
- Must cleaned regularly by a wipe
MS 58 is a highly polished brass. Due to the lack of a protective varnish, the surface must be polished at intervals with a soft cloth. Alternatively, a protective varnish can be applied after engraving to avoid oxidation in the air.
Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com
Warning Notes:
Attention: Sharp edges. Contains lead – avoid skin contact.
Safety Instructions:
Use a local exhaust system in the area of dust and smoke. Dispose of metal waste and grinding dust in accordance with local regulations.
Intended Use:
The product is intended for the production of signs.
Prices are only available upon verified registration on this website
Colours
polished
Capabilities
- Laser
- Laser Vector Cuts
- Rotating Carbide
- Hot Stamps
- Screen Prints
- Drills
- Bonds
- Saws
- Shears
- Punch
Properties
| Finish: | Gloss |
|---|---|
| Cutting Depth: | 0,1-0,3mm |
| Thicknesses: | 1,0/1,5/2,0/3,0 mm |
| Standard Format: | 600 x 500 mm |
| Temp. max: | 100 °C |
| Engraving material: | Brass |
- UV Stable
- Flexible
- Break-Proof
Usage
- Interior
- Exterior
Customers also bought
Product number:
90500
Laser Rubber "Standard 50W", DIN A4, Grey
- Suitable for any type of stamp
- Alcohol and water based inks resistance
- Outstanding engraving and impression quality
- Hardness: 53 Sh
- CO2 Laser 50 W