AlumaMark
- Returns black characters when lasered
- No oxidation or paint fill needed
- Satin and matte finish
- Low power settings
AlumaMark is a specially engineered aluminum designed to be marked with a CO₂ laser. It is distinguished by its unique ability to produce black, positive markings on silver, gold, bronze, brass-colored, or colored surfaces. The material is specifically developed for use with low energy settings and is ideal for producing nameplates, plaques, trophy plates, labels, indoor signage, and many other applications. Unlike traditional processes where materials are etched or engraved, AlumaMark marking is created through a thermal reaction with the heat of the laser. This process allows not only for dark markings but also for lighter shades and halftones. As a result, AlumaMark is particularly well suited for creating photos and highly detailed graphics.
Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com
Warning Notes:
Caution: Sharp edges. Health-hazardous fumes when heated.
Safety Instructions:
Use a local exhaust system in areas with dust and smoke development.
Intended Use:
The product is intended for the production of signs.
Colours
Thickness 0,51 mm
Thickness 0,13 mm
Capabilities
- Laser
- Laser Vector Cuts
- Rotating Carbide
- Hot Stamps
- Screen Prints
- Drills
- Bonds
- Saws
- Shears
- Punch
Properties
| Finish: | Matte/Gloss |
|---|---|
| Cutting Depth: | -- |
| Thicknesses: | 0,13/0,51 mm |
| Standard Format: | 305 x 254 mm |
| Temp. max: | 80 °C |
| Engraving material: | Aluminium |
- UV Stable
- Flexible
- Break-Proof
Usage
- Interior
- Exterior
Customers also bought
Magnet Badge MAG 03 #987-003
- Two round rare earth magnets
- High magnetic power
- Base is made of plastic
- 32 x 12 mm
- Zinc-plated steel plate w/ foam pad
Adhesive Transfer Tape 19 mm x 50m
- High initial adhesion (tack)
- High shear strength
- Resistance to ageing, weathering and UV-radiation
- Resistance to the influence of chemicals and solvents
- 19 mm x 50 m
Double-sided acrylic adhisive Tape 12 mm x 50 m
- High performance permanent bond
- Long aging, UV resistant
- Withstands outdoor exposure
- Excellent for continuous runs, die-cutting
- 12 mm x 50 m
Bevel Cutter 45° 3,17x115mm
- Bevel Cutter
- Cutting angle 45°
- Suitable for beveling machines
- 3,17 x 115 mm
Laser Rubber "No Smell", DIN A4, Grey
- Free of smell
- Alcohol and water based inks resistance
- Outstanding engraving and impression quality
- Hardness: 60 Sh
Plywood Poplar 600x300x6mm
- Low smoke emission
- Suitable for laser engraving and painting
- Surfaces are untreated
- Plywood made of Poplar