AlumaMark
- Returns black characters when lasered
- No oxidation or paint fill needed
- Satin and matte finish
- Low power settings
AlumaMark is specialized aluminum that may be imaged or marked using a CO2 laser. Unique among laserable substrates, AlumaMark allows one to create black, positive marks on silver, gold, bronze, brass, or colored backgrounds. Designed so that it may be marked using low power settings, AlumaMark is used to produce Nameplates, Name Badges, Plaque and Trophy Plates, Labels, Interior Signage, and more. Because AlumaMark is not etched or engraved, but rather marked through a thermal reaction with the heat of a laser, it is possible to create lighter marks and halftone shades. This makes AlumaMark ideal for creating photograph and detailed artwork reproductions.
Manufacturer:
Innograv GmbH, Leinenkamp 9, 27299 Langwedel, Germany
E-mail: info@innograv.com
Warning Notes:
Caution: Sharp edges. Health-hazardous fumes when heated.
Safety Instructions:
Use a local exhaust system in areas with dust and smoke development.
Intended Use:
The product is intended for the production of signs.
Colours
Thickness 0,51 mm
Thickness 0,13 mm
Capabilities
- Laser
- Laser Vector Cuts
- Rotating Carbide
- Hot Stamps
- Screen Prints
- Drills
- Bonds
- Saws
- Shears
- Punch
Properties
| Finish: | Matte/Gloss |
|---|---|
| Cutting Depth: | -- |
| Thicknesses: | 0,13/0,51 mm |
| Standard Format: | 305 x 254 mm |
| Temp. max: | 80 °C |
| Engraving material: | Aluminium |
- UV Stable
- Flexible
- Break-Proof
Usage
- Interior
- Exterior
Last seen products
Laserable Brass
- Laser markable brass
- Allows to create brass marks on black
- Available in 0,6 mm thickness
Marking Stick, black #507102
- Highlighter, fill-in paint
- For small engravings
- Paint stays flexible
- Mark temperature resistance 260°C
- Color black
Marking Stick, white #507101
- Highlighter, fill-in paint
- For small engravings
- Paint stays flexible
- Mark temperature resistance 260°C
- Color white
LaserAcryl 1
- Laser engraving and cutting
- Rotary engravable
- UV stable
- Microthin surface layer
- Matte, brushed or glossy finish
- Ideal for industrial use
- Wide range of colours
Brass MS58
- Highly polished finshed
- Alloy MS58
- Unprotected surface
- Must cleaned regularly by a wipe
HardwearPlus
- Matte finish
- UV stable
- Microthin surface layer
- Perfect for fine detail engraving
- Durable micro-surface