Configurable
Standard Cutter 4,00x50mm
- Solid Carbide
- Standard Cutter
- 4,00 x 50 mm
- 9 available tip sizes
Most frequently used tool for engraving plastics and metals. Cutters are made from Micrograin carbide to produce cleaner cuts and stay sharper longer.
Shank Diameter 4,00 mm
Length: 50 mm
Available tip sizes in mm: 0,25/0,32/0,5/0,75/1,0/1,25/1,5/2,0/3,0
Suitable for: ACR (acrylic) / FLX (soft plastics - flexible engraving stock) / BAL (soft metals - brass, aluminum) / SSS (harder metals - steel, stainless steel)
Shank Diameter 4,00 mm
Length: 50 mm
Available tip sizes in mm: 0,25/0,32/0,5/0,75/1,0/1,25/1,5/2,0/3,0
Suitable for: ACR (acrylic) / FLX (soft plastics - flexible engraving stock) / BAL (soft metals - brass, aluminum) / SSS (harder metals - steel, stainless steel)
Customers also bought:
Aluminium G (matt)
Configurable
LaserAcryl 1 - Laser engraving and cutting
- Rotary engravable
- UV stable
- Microthin surface layer
Tissue Tape 244mm x 100m - Low tack, paper mask
- Made for laser engraving, crystal etchings, and letter transferring
- Protects foil from edge burn while laser engraving
- Size 244 mm x 100 m
Item No.: 612441
Lacquer black 500g -UN1263- - Nitrolaque black
- For colouring rotary engraving on metal and steel
- Fast drying
- 500 g
Item No.: 61607532
Engraving Table Tape, 12,7mm x 100m - Hold engraving plates to the bed
- 50-60 engravings without changing the tape
- Size 12,7 mm x 66 m
Item No.: 619990127
End Mill - Two Flutes 3,0x37mm / 3,0mm - 2 Flutes End Mill
- Spiral O-flute
- Tip width 3,0 mm
- 3,00 x 37 mm
Item No.: 62581033
Configurable
Aluminium W (glossy) - Double-sided anodised aluminium
- Polished finish
- Premium quality
- Weather-resistant
Samvol Cooling and Lubricant 0,5l - Cooling and lubricant agent
- 100% bio-degradeable
- For aluminium, brass, steel and even plastic
- 0,5 litre
Item No.: 6150806
Aluminium Oxide 96ml - Blackening solution for aluminium alloys
- Bottle can contents 96 ml
Item No.: 6150755
Configurable
Custom door plates Type 3 - Room and door signage
- Available in many colours and materials.
Configurable
LaserBasic - Laser engraving and cutting
- Rotary engravable
- Single colored impact acrylic
- Braille-engravable
Configurable
HSS-Cutter 4,36x165mm - High Speed Steel Engraving Cutters
- 4,36 x 165 mm
- 9 available tip sizes
Configurable
Standard Cutter 4,00x110mm - Solid Carbide
- Standard Cutter
- 4,00 x 110 mm
- 9 available tip sizes
Configurable
Engraving Brass (polished) - Polished finish
- Coated nylon paint against oxidation
- Can be diamond drag or rotary engraved
Configurable
Cast Acrylic - Glossy finish
- Cast Acrylic
- 2-Ply engraving material
- Laminated cap is scratchproofed
Configurable
Stainless Steel (V2A) - Stainless steel 1.4301 (V2A)
- Grinded on one side
- Cold rolled IIIc/2b
Veneer Wood Maple, 3 mm, 600 x 300 mm, geölt - High-quality homogeneous HDF core
- Easy processing with the laser
- Little smoke residue formation
- Little cleaning effort
Item No.: 46FH1030
Vinly Cutting Blade MIMAKI 40° - Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting small letters and detail in 0,5 - 1,0 mm thick material
- Offset 0,125 mm
Item No.: 63AVBMIM003
Glas Cutter 4,00x170mm - Glas Cutter
- 3 bevels diamond 120°
- For glass engraving and hard metals
- 4,0 x 170 mm
Item No.: 6258174
End Mill - Two Flutes 3,0x37mm / 2,0mm - 2 Flutes End Mill
- Spiral O-flute
- Tip width 2,0 mm
- 3,00 x 37 mm
Item No.: 62581032
Configurable
Standard Cutter 3,00x50mm - Solid Carbide
- Standard Cutter
- 3,00 x 50 mm
- 9 available tip sizes
CerMark LMM 6000 Aerosol Spray, 340g - LMM 6000 Aerosol
- Laser marking inks
- Creating black marks on a variety of metals
- Spray Can contents 340 g
Item No.: 6150756
Marking Stick, black #507102 - Highlighter, fill-in paint
- For small engravings
- Paint stays flexible
- Mark temperature resistance 260°C
Item No.: 61507102
CerMark ULTRA Aerosol Spray, 56g - Spray can contents 56 g
- Stone / brick / slate marking
- Tile / glass marking
- No hard setting
Item No.: 6150202
Configurable
Standard Cutter 4,00x165mm - Solid Carbide
- Standard Cutter
- 4,00 x 165 mm
- 9 available tip sizes
Magnet Badge MAG 03 #987-003 - Two round rare earth magnets
- High magnetic power
- Base is made of plastic
- 32 x 12 mm
Item No.: 60987003
Configurable
Custom door plates Type 2 - Room and door signage
- Available in many colours and materials.
Ornamental Plate Type 386 #508 - For Signage of paintings, saddles and honorary plates
- Signs out of brass
- 90x18 mm
- silver brushed / brass
Item No.: 55386508
Ornamental Plate Type 386 #507 - For Signage of paintings, saddles and honorary plates
- Signs out of brass
- 90x18 mm
- brass brushed
Item No.: 55386507
Ornamental Plate Type 385 #508 - For Signage of paintings, saddles and honorary plates
- Signs out of brass
- 65 x 10 mm
- silver brushed / brass
Item No.: 55385508
Ornamental Plate Type 385 #507 - For Signage of paintings, saddles and honorary plates
- Signs out of brass
- 65 x 10 mm
- brass brushed
Item No.: 55385507
Configurable