Configurable
Tools
No results were found for the filter!
Standard Cutter 3,00x50mm
Configurable
Standard Cutter 3,17x115mm - Solid Carbide
- Standard Cutter
- 3,17 x 115 mm
- 9 available tip sizes
Configurable
Standard Cutter 4,00x50mm - Solid Carbide
- Standard Cutter
- 4,00 x 50 mm
- 9 available tip sizes
Configurable
Standard Cutter 4,00x110mm - Solid Carbide
- Standard Cutter
- 4,00 x 110 mm
- 9 available tip sizes
Configurable
Standard Cutter 4,00x165mm - Solid Carbide
- Standard Cutter
- 4,00 x 165 mm
- 9 available tip sizes
Configurable
Standard Cutter 4,36x165mm - Solid Carbide
- Standard Cutter
- 4,36 x 165 mm
- 9 available tip sizes
Configurable
Standard Cutter 4,36x185mm - Solid Carbide
- Standard Cutter
- 4,36 x 185 mm
- 9 available tip sizes
Configurable
Standard Cutter 6,00x50mm - Solid Carbide
- Standard Cutter
- 6,00 x 50 mm
- 9 available tip sizes
Configurable
Standard Cutter 6,35x165mm - Solid Carbide
- Standard Cutter
- 6,35 x 165 mm
- 9 available tip sizes
Configurable
Quarter-Round Cutter 3,17x115mm - Solid Carbide
- Quarter-Round Cutter
- 3,17 x 115 mm
- 9 available tip sizes
Configurable
Quarter-Round Cutter 4,36x165mm - Solid Carbide
- Quarter-Round Cutter
- 4,36 x 165 mm
- 9 available tip sizes
Configurable
HSS-Cutter 3,17x115mm - High Speed Steel Engraving Cutters
- 3,17 x 115 mm
- 9 available tip sizes
Configurable
HSS-Cutter 4,36x165mm - High Speed Steel Engraving Cutters
- 4,36 x 165 mm
- 9 available tip sizes
Configurable
HSS-Cutter 6,35x165mm - High Speed Steel Engraving Cutters
- 6,35 x 165 mm
- 9 available tip sizes
End Mill - Two Flutes 3,0x37mm / 2,0mm - 2 Flutes End Mill
- Spiral O-flute
- Tip width 2,0 mm
- 3,00 x 37 mm
Item No.: 62581032
End Mill - Two Flutes 3,0x37mm / 2,5mm - 2 Flutes End Mill
- Spiral O-flute
- Tip width 2,5 mm
- 3,00 x 37 mm
Item No.: 625810325
End Mill - Two Flutes 3,0x37mm / 3,0mm - 2 Flutes End Mill
- Spiral O-flute
- Tip width 3,0 mm
- 3,00 x 37 mm
Item No.: 62581033
Configurable
Parallel Cutter 3,17x115mm - Parallel Engraving Cutter
- Straight edges
- 3,17 x 115 mm
- 4 available tip sizes
Configurable
Parallel Cutter 4,36x165mm - Parallel Engraving Cutter
- Straight edges
- 4,36 x 165 mm
- 4 available tip sizes
Dovetail Cutter 4,36x165mm - Dovetail Cutte
- For making an angled undercut
- 15° bevel
- Tip size 4,35 mm
Item No.: 6258115
Wide-Cut Cutter 4,36x165mm - Wide Cut Engraving Cutter
- Tip size 6,35 mm
- 4,36 x 165 mm
Item No.: 6258206
Wide-Cut Cutter 6,35x165mm - Wide Cut Engraving Cutter
- Tip size 12,7 mm
- 6,35 x 165 mm
Item No.: 6258112
Bevel Cutter 45° 3,17x115mm - Bevel Cutter
- Cutting angle 45°
- Suitable for beveling machines
- 3,17 x 115 mm
Item No.: 62541045
Bevel Cutter 45° 6,35x130mm - Bevel Cutter
- Cutting angle 45°
- Suitable for beveling machines
- 6,35 x 130 mm
Item No.: 625765845
Bevel Cutter 90° 3,17x115mm - Bevel Cutter
- Cutting angle 90°
- Suitable for beveling machines
- 3,17 x 115 mm
Item No.: 62541090
Bevel Cutter 90° 4,36x165mm - Bevel Cutter
- Cutting angle 90°
- Suitable for beveling machines
- 4,36 x 165 mm
Item No.: 625810190
Bevel Cutter 90° 6,35x130mm - Bevel Cutter
- Cutting angle 90°
- Suitable for beveling machines
- 6,35 x 130 mm
Item No.: 625765890
Configurable
Spiral Cutter 3,17 x 115mm - Spiral Cutter
- Extra strength
- Suitable for stainless steel
- 3,17 x 115 mm
Configurable
Spiral Cutter 4,36 x 165mm - Spiral Cutter
- Extra strength
- Suitable for stainless steel
- 4,36 x 165 mm
1 Flute Router-Mill 4,36 x 165mm / 2,0mm - 1 Flute Router-Mill
- For cutting plastics
- Spiral O-flute
- Tip width 2,0 mm
Item No.: 62581052
1 Flute Router-Mill 4,36 x 165mm / 3,0mm - 1 Flute Router-Mill
- For cutting plastics
- Spiral O-flute
- Tip width 3,0 mm
Item No.: 62581053
1 Flute Router-Mill 5,00 x 50mm / 5,0mm - 1 Flute Router-Mill
- For cutting plastics
- Spiral O-flute
- Polished flute
Item No.: 62R1U050516
1 Flute Router-Mill 6,00 x 50mm / 3,0mm - 1 Flute Router-Mill
- For cutting plastics
- Spiral O-flute
- Polished flute
Item No.: 62R1U060310
1 Flute Router-Mill 8,00 x 63mm / 8,0mm - 1 Flute Router-Mill
- For cutting plastics
- Spiral O-flute
- Polished flute
Item No.: 62R1U080824
1 Flute Router-Mill 3,00 x 38mm / 2,0mm - 1 Flute Router-Mill
- For cutting aluminum & soft metals
- Spiral O-flute
- Polished flute
Item No.: 62R1A030205
1 Flute Router-Mill 6,00 x 50mm / 6,0mm - 1 Flute Router-Mill
- For cutting aluminum & soft metals
- Spiral O-flute
- Polished flute
Item No.: 62R1A060616
Optical Comparator #RUML - Measuring magnifier
- 12X magnification
- 10 mm scale
- 0.1 mm scale division
Item No.: 70RUML
Burnishing Attachmant 3,17mm #DA 125 - Accessory for Engraving Diamonds
- Provides light, even pressure
- For shank diameter 3,17 mm
Item No.: 62DA125
Burnishing Attachment 4,36mm #DA 171 - Accessory for Engraving Diamonds
- Provides light, even pressure
- For shank diameter 4,36 mm
Item No.: 62DA171
Diamant Gravers 3,17x28,5mm 120° - Diamond Graver
- Non-rotating tool
- Diamond angle: 120°
- Surface marking only
Item No.: 6258140
Diamant Gravers 3,17x110mm 120° - Diamond Graver
- Non-rotating tool
- Diamond angle: 120°
- Surface marking only
Item No.: 625412
Diamant Gravers 4,00x150mm 120° - Diamond Graver
- Non-rotating tool
- Diamond angle: 120°
- Surface marking only
Item No.: 6258124
Diamant Gravers 4,36x150mm 120° - Diamond Graver
- Non-rotating tool
- Diamond angle: 120°
- Surface marking only
Item No.: 6258102
Diamant Gravers 6,00x165mm 120° - Diamond Graver
- Non-rotating tool
- Diamond angle: 120°
- Surface marking only
Item No.: 6258116
Diamant Gravers 6,35x150mm 120° - Diamond Graver
- Non-rotating tool
- Diamond angle: 120°
- Surface marking only
Item No.: 6255114
Glas Cutter 4,00x170mm - Glas Cutter
- 3 bevels diamond 120°
- For glass engraving and hard metals
- 4,0 x 170 mm
Item No.: 6258174
Glas Cutter 4,36x170mm - Glas Cutter
- 3 bevels diamond 120°
- For glass engraving and hard metals
- 4,36 x 170 mm
Item No.: 6258170
Configurable
Burnisher 4,36x155mm - Diamond Burnisher
- Rotating tool
- For surface engraving glass, brass, aluminium
- Very durable
Spare Saw Blade for VARGA 24T #1031 - Carbide Tip Saw Blade
- Suitable for Varga Saws
- 24 teeth
Item No.: 701031
Spare Saw Blade for VARGA 36T #1032 - Carbide Tip Saw Blade
- Suitable for Varga Saws
- 36 teeth
Item No.: 701032
Original Saw Blade VARGA 24 Teeth - Original Saw Blade for Varga Saws
- Carbide Tip
- 24 teeth
Item No.: 701028
Original Saw Blade VARGA 36 Teeth - Original Saw Blade for Varga Saws
- Carbide Tip
- 36 teeth
Item No.: 701029
Original Saw Blade VARGA 2 24 Teeth - Original Saw Blade for Varga 2
- Carbide Tip
- 24 teeth
Item No.: 701111
Vacuum Table A3 - 450x300mm - Vacuum table A3 - 450 x 300 mm
- Clamping time reductions over 70%
Item No.: 704530
Vacuum Tabel A4 - 330x220mm - Vacuum table A4 - 330 x 220 mm
- Clamping time reductions over 70%
Item No.: 703322
Vinly Cutting Blade ANAGRAPH 45° - Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting general signage vinyl
- Offset 0,25 mm
Item No.: 63AVBANA045
Vinly Cutting Blade ANAGRAPH 60° - Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting material 3,0 mm and thicker
- Offset 0,25 mm
Item No.: 63AVBANA060
Vinly Cutting Blade GRAPHTEC 45° - Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting general signage vinyl
- 45°
Item No.: 63AVBGRA045
Vinly Cutting Blade GRAPHTEC 60° - Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting material 3,0 mm and thicker
- 60°
Item No.: 63AVBGRA060
Vinly Cutting Blade IOLINE 45° - Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting general signage vinyl
- 45°
Item No.: 63AVBIOL045
Vinly Cutting Blade IOLINE 60° - Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting material 3,0 mm and thicker
- 60°
Item No.: 63AVBIOL060
Vinly Cutting Blade GERBER 30° - Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting 0,5 - 1,0 mm thick material
- 30°
Item No.: 63AVBGER030
Vinly Cutting Blade GERBER 45° - Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting 1,0 - 3,0 mm thick material
- 45°
Item No.: 63AVBGER045
Vinly Cutting Blade GERBER GSX - Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting 0,5 - 1,0 mm thick material
- GSX Blade
Item No.: 63AVBGERGSX
Vinly Cutting Blade MIMAKI 37° - Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting 0,25 - 0,30 mm thick material
- Offset 0,25 - 0,30 mm
Item No.: 63AVBMIM001
Vinly Cutting Blade MIMAKI 40° - Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting small letters and detail in 0,5 - 1,0 mm thick material
- Offset 0,125 mm
Item No.: 63AVBMIM003
Vinly Cutting Blade MIMAKI 56° - Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting small letters and detail in 0,5 - 1,0 mm thick material
- Offset 0,75 mm
Item No.: 63AVBMIM005
Vinly Cutting Blade MUTOH 30° - Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting 0,5 - 1,0 mm thick material
- Offset 0,5 mm
Item No.: 63ZME10034A
Vinly Cutting Blade MUTOH 45° - Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting small letters and detail in 1,0 - 3,0 mm thick material
- Offset 0,5 mm
Item No.: 63ZME10034B
Vinly Cutting Blade MUTOH 60° - Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting small letters and detail in material 3,0 mm or thicker
- Offset 0,5 mm
Item No.: 63ZME10034C
Vinly Blade, Standart 45°, ROLAND/GCC - Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting general signage vinyl. Standard blade with largest angle
- ROLAND/GCC
Item No.: 63AVBRG1005
Vinly Cutting Blade ROLAND/GCC - Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting thin sandblast masks and stencils with friction feed or sprocket feed machines
- ROLAND/GCC
Item No.: 63AVBRG1715
Vinly Cutter Blade ROLAND/GCC - Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting small text and fine detail
- Offset 0,175 mm
Item No.: 63AVBRG3017
Vinly Cutting Blade ROLAND/GCC - Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting reflective vinyl, cardboard, sandblast, and stencil
- Offset 0,50 mm
Item No.: 63AVBRG3050
Vinly Cutting Blade ROLAND/GCC - Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting cardboard, sandblast, and stencil
- Offset 0,75 mm
Item No.: 63AVBRG3075
Vinyl Cutting Blade ROLAND/GCC - Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting cardboard, sandblast, and stencil
- Offset 1,00 mm
Item No.: 63AVBRG3100
Vinyl Cutting Blade ROLAND/GCC - Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting thick, fluorescent and reflective vinyl
- For cutting detailed work on standard vinyl
Item No.: 63AVBRG5025
Vinyl Cutting Blade SUMMAGRAPHICS 36° - Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting general signage vinyl 0,5 - 3,0 mm thick
- Offset 0,45 mm
Item No.: 63AVBSUM001
Vinyl Cutting Blade SUMMAGRAPHICS 60° - Micrograin carbide Vinly Cutting Blade
- Packaged with protective cap
- For cutting material 12 mil. and thicker with 0.45 mm
- Offset 0,45 mm
Item No.: 63AVBSUM003