Advice on custom plates and strips
Do you need plates or strips cut to size for a customer order but don’t have the time or means to make them yourself? No problem. We are specialists in custom-made items. Simply order your custom plates and strips in our online shop using a configurator that guides you step by step to the finished item. You start the configurator on the details page for the engraving materials.
A custom plate or strip refers to a rectangular format that can be ordered with an all-round facetted edge, rounded corners, drilled holes or self-adhesive backing. For technical reasons, rounded corners cannot be made with an all-round facet.
Strips are available in lengths of 610 mm and 1000 mm and can be supplied with long-side facet and self-adhesive backing.
General information
-
Rounded corners can be supplied with a radius of 2/3/4/5/6/8/10 or 15 mm.
-
With a bevel, the edges are machined off at an angle of 45°. The process leaves 1/3 of the sign thickness unmachined.
-
Drilled holes with diameters from 1.5 to 11 mm can be inserted. If holes are required, the following details should be specified:
-
Distance from hole centre to hole centre
-
Diameter and number of holes
-
Distance from hole centre to hole centre
-
Distance of hole centre from top edge
-
Custom plates and strips are manufactured to tolerances according to DIN ISO 2768-m. Dimension limits for lengths and widths:
-
Tolerance class
Tolerance in mm for nominal dimension range in mm
more than 6,0
to 30,0more than 30,0
to 120more than 120
to400&more than 400
to 1000more than 1000
to 2000m
middle
± 0,10
± 0,20
± 0,50
± 0,80
± 1,20
If you have any questions and would like personal advice,
we are available Mondays to Thursdays from 8:00 am to 4:30 pm and on Fridays from 8:00 am to 3:30 pm
on +49 (0)4232 9458-0.
We look forward to your call.